Shop our Catalog Store in East Ridge, TN

Categories

Vents

← Prev
1 2
Next →
Sort by Alphabetical: A to Z
24 Per Page
  • Save 15%
Attwood 3 Collector Box 1345-1
$28.22 $23.99
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion resistant plastic. MFG# 1345-1 13451 UPC# 022697134516
43 item(s)
+ −
  • Save 15%
Attwood Collector Box F/2-3 Hoses 1341-1
$25.87 $21.99
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent. MFG# 1341-1 13411 UPC# 022697134110
43 item(s)
+ −
  • Save 15%
Attwood Louver Vent Venturi/White/Bulk 1494F1
$28.22 $23.99
A clean, contemporary, louver designed vent. Corrosion-resistant ABS plastic. Install with #8 screws. For use with collector boxes 13411 for 3" system or 13421 for 4" system. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D MFG# 1494F1 UPC# 022697010445
188 item(s)
+ −
  • Save 19%
Attwood Louvered Vent SS 1488-5
$72.39 $58.99
All-welded 304 stainless steel construction with polished finish. Adapts to 3" or 4" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16" L x 4-3/8" H x 3/4" D MFG# 1488-5 14885 UPC# 022697148858
81 item(s)
+ −
  • Save 15%
Attwood Louvered Vent Venturi Black 1494A5
$36.46 $30.99
A clean, contemporary, louver designed vent. Corrosion-resistant ABS plastic. Install with #8 screws. For use with collector boxes 13411 for 3" system or 13421 for 4" system. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D Cut Out 2" H x 15-3/8" L MFG#...
98 item(s)
+ −
  • Save 15%
Attwood Louvered Vent-Off White 1495-1
$35.28 $29.99
Constructed of paintable, corrosion-resistant ABS plastic with no sharp edges. For 3? I.D. ventilation system use with 13451 collector box. Installs with #8 fasteners. Dimensions: 17-7/8" L x 3-7/16" H x 3/4" D MFG# 1495-1 14951 UPC# 022697010438
90 item(s)
+ −
  • Save 15%
Attwood Louvered Vent/Flush - Black 1423-5
$30.58 $25.99
Canted louvers deflect rain and spray and help conceal the collector box. Black ABS plastic. Installs flush to the hull with #8 screws. Use with 13411 collector box for 3" system. Dimensions: 17-9/16" L x 2-3/4" H x 1/4" D MFG# 1423-5 14235 UPC# 022697142351
101 item(s)
+ −
  • Save 15%
Attwood Twist-On Hose Flange F/3 Hose 1405-3
$17.64 $14.99
For 3" hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with three mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed. MFG# 1405-3 14053 UPC# 022697140531
29 item(s)
+ −
  • Save 15%
Attwood White Louvered Vent 1425-5
$35.28 $29.99
Canted louvers deflect rain & spray, help conceal collector box. Drain slots prevent water accumulation. Paintable ABS plastic. Installs flush to hull with #8 screws. Requires 1341 collector box for 3'' system or 1342 for 4'' system. MFG# 1425-5 14255 UPC# 022697142559
59 item(s)
+ −
  • Save 13%
Itt Jabsco Hd Cont. Blower Flexmount 357700092
$405.29 $350.99
CONTINUOUS HEAVY DUTY BLOWERS have a minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM . MFG#...
1 item(s)
+ −
  • Save 13%
Itt Jabsco Par 12V Blower Flangemount 4 35400-0000
$276.49 $239.99
Safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and...
30 item(s)
+ −
  • Save 15%
Sea Dog Abs 5 Slot Ventilator - White 337290
$11.75 $9.99
Injection molded. Ventilator may be used with collector boxes 331293 and 332398. Bulk. MFG# 337290 UPC# 035514337526
136 item(s)
+ −
  • Save 15%
Sea Dog Abs 5 Slot Vnt-Black 337291
$11.75 $9.99
Injection molded. Ventilator may be used with collector boxes 331293 and 332398. Bulk. MFG# 337291 UPC# 035514337533
47 item(s)
+ −
  • Save 15%
Sea Dog Clamp On Mt Fan With/Cig Ltg Plug 450110-1
$59.99 $50.99
Clamp-on fan. Plug into a 12-volt power socket. Integral high/low speed switch included. Uses 3.4/4.5 watts, and .28/.38 amps. MFG# 450110-1 4501101 UPC# 035514450010
26 item(s)
+ −
  • Save 15%
Sea Dog Louvered Vent Black 337211-1
$15.28 $12.99
Injection molded ABS. Dimensions: 2-5/8" x 17-1/2" L x 2-5/8" H x 7/16" D MFG# 337211-1 3372111 UPC# 035514337113
11 item(s)
+ −
  • Save 15%
Sea Dog Louvered Vent White 337210-1
$15.28 $12.99
Injection molded ABS. Dimensions: 2-5/8" x 17-1/2" L x 2-5/8" H x 7/16" D MFG# 337210-1 3372101 UPC# 035514337106
44 item(s)
+ −
  • Save 26%
Sea Dog SS Cowl Vent With/Black Plastic Base Uses 3" Hose 331320-1
$57.96 $42.99
Stainless cowl vent with a plastic base. Use with 3" hose and #8 flat head fastener. MFG# 331320-1 3313201 UPC# 035514331555
19 item(s)
+ −
  • Save 15%
Sea Dog SS Louvered Vent 5 X 4-5/8 331390-1
$19.99 $16.99
Stamped 304 stainless steel. Carded. MFG# 331390-1 3313901 UPC# 035514331074
8 item(s)
+ −
  • Save 15%
Sea Dog Stainless Locker Vent - 2 3/8" 331620-1
$15.28 $12.99
Stamped 304 stainless steel. Carded. MFG# 331620-1 3316201 UPC# 035514331135
50 item(s)
+ −
  • Save 15%
Sea Dog Stainless Round Louvered Vent 5" - 331425-1
$18.81 $15.99
MFG# 331425-1 3314251 UPC# 035514331128
206 item(s)
+ −
  • Save 15%
Sea-Dog Corp 3 Pvc Lowprofile Cowlvent Wht 7271323
$37.75 $31.99
Dip molded PVC. Includes snap-on deck plate. MFG# 7271323 UPC# 035514727235
28 item(s)
+ −
  • Save 22%
Sea-Dog Corp 4 Pvc Lowprofile Cowlvent Wht 7271423
$52.75 $40.99
Dip molded PVC. Includes snap-on deck plate. MFG# 7271423 UPC# 035514727280
12 item(s)
+ −
  • Save 15%
Sea-Dog Corp Flush Hose Vent 3373161
$7.05 $5.99
Injection molded ABS. Overall face dimension is 3-5/8" x 3-5/8". Hose/hole size 3". Carded. MFG# 3373161 UPC# 035514337014
165 item(s)
+ −
  • Save 15%
Sea-Dog Corp Hose Vent Elbow 3 337350
$15.28 $12.99
Injection molded ABS. Works in conjunction with Flush Thru-Vent part numbers 337326 337316 and 337376. MFG# 337350 UPC# 035514338363
34 item(s)
+ −
← Prev
1 2
Next →

Product filters

Help

Have any questions on our products?  Feel free to contact us.