Y-Valves, Parts, Kits & Pumps

$230.58 $195.99
Manual Pump Assembly for Toilet MFG# 814723901 UPC# 7330717009960
25 item(s)
+

$232.93 $197.99
MFG# 385230980 UPC# 87735106122
116 item(s)
+

$223.99 $200.99
Toilet waste pump is made of high quality ABS plastic. Lightweight. Can be mounted in various orientations/positions. Large non-choke valves. Tough plastic housing keeps in nasty smells. Easy to clean (no tools required) 14-3/4" gals per minute. 1-1/2" inlet/outlet. Max lift and max head of 15 ft....
2 item(s)
+

$239.99 $203.99
CROWN HEAD DD REPAIR KIT MFG# CDRK
5 item(s)
+

$263.00 $209.99
HVL series vented loops are for hose connections.The oversized vent valve is virtually clog-free, and can easily be removed without tools for inspection or cleaning by unscrewing the threaded cap. Mounting hardware is included. MFG# HVL-750 HVL750 UPC# 742985003859
19 item(s)
+

$263.00 $209.99
HVL series vented loops are for hose connections.The oversized vent valve is virtually clog-free, and can easily be removed without tools for inspection or cleaning by unscrewing the threaded cap. Mounting hardware is included. MFG# HVL-1000 HVL1000 UPC# 742985003071
19 item(s)
+

$294.00 $234.99
HVL series vented loops are for hose connections.The oversized vent valve is virtually clog-free, and can easily be removed without tools for inspection or cleaning by unscrewing the threaded cap. Mounting hardware is included. MFG# HVL-1500 HVL1500 UPC# 742985002715
8 item(s)
+

$293.19 $237.99
Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with o-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual, stainless steel serrated blades ensure problem free pumping. Self priming up to 3' lift. Thermally...
81 item(s)
+

$298.39 $237.99
12 Volt Centrifugal Macerator Pump Replacement Macerator for Aqua T Style Toilets MFG# 81-47248-01 814724801
4 item(s)
+

$287.05 $243.99
The perfect disposer for the lavatory unit in boats and recreational vehicles? it takes care of toilet waste. A rotary cutter shreds waste before it is pumped out through the discharge hose. The pump can be connected directly to the bowl discharge outlet or holding tank. 12 V DC. Connection: Inlet: 1-1/2" hose,...
153 item(s)
+

$308.99 $247.99
Crown Head Intake Pump Assembly MFG# CH102MW UPC# 085462005824
26 item(s)
+

$313.49 $255.99
For simple holding tank pump-outs. Macerator grinds waste small enough to fit through 1" hose barbed discharge port. Self-priming 12V DC. Can empty 30-gal. holding tank in less than 3 minutes. Amp/fuse: 15/20. Intake port with 1-1/2'' NPT can be screwed directly into tank's female discharge fitting. MFG#...
550 item(s)
+

$360.00 $256.99
All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Our proprietary rubber impeller compound allows longer dry running time Macerator pump housing can be rotated in increments of 90 degrees to allow for left, right or top discharge...
43 item(s)
+

$336.99 $274.99
The Jabsco macerator pumps are the answer to holding tank pump outs. The macerator section grinds waste into small particles so it easily passes through the pump's hose discharge port. Detects the absence of fluid then shuts-off pump before impeller is damaged. Sensor provides a 16 - 20 second run-dry period to...
59 item(s)
+

$328.22 $278.99
PUMP, MAG DRIVE 12V 5/8" CM30P7-1 model 12 volt centrifugal pump with 5/8 in. ports is suitable for fresh water, salt water, & ethylene glycol circulation. Johnson Pump CM30 circulation pump CM30P7-1 series 12 volt DC operation Provides 5 GPM flow rate with low current consumption 5/8 in....
46 item(s)
+

$344.59 $286.99
An ultramodern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft ? new or used. It?s non-choke valves mean that no in-line filters are...
18 item(s)
+

$388.19 $307.99
RV macerator pump can empty a 30 gallon (115 liter) holding tank in 3 minutes Grinds waste into small particles for easy disposal Self-priming with a flow rate of 13 gpm (49 lpm) Pump can be permanently installed for easy holding tank evacuation into a toilet or plumbing clean out access MFG#...
7 item(s)
+

$403.99 $332.99
An have efficient pumping action. Easy for guests to operate. Time proven design. Quality construction. Self-priming pump. Equipped with special air vent to reduce back pressure when inlet valve is closed. Designed for the marine environment and busy boater. Vitreous standard china bowl. Base and housing are...
23 item(s)
+

$403.52 $342.99
SENDER ASSEMBLY MFG# MKSII
13 item(s)
+

$417.00 $342.99
All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Our proprietary rubber impeller compound allows longer dry running time Macerator pump housing can be rotated in increments of 90...
3 item(s)
+

$395.59 $344.99
For holding tanks and vacuum systems. Virtually unblockable and self priming up to 9.8 ft. Can be mounted in most convenient part of boat. Easy to maintain and can run dry without damage. Pumps inmacerated waste. Fuse size 15 amp automotive Output(open flow) 4-3/4 gallons per minute. Wire size of 16 AWG. Max...
56 item(s)
+

$424.69 $360.99
All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Our proprietary rubber impeller compound allows longer dry running time Macerator pump housing can be rotated in increments of 90 degrees to allow for left, right or top discharge...
1 item(s)
+

$430.58 $365.99
Run dry protection up to 30 seconds Pump housing connects onto the standard 3" waste outlet 6' Power leads with plug may be permanently attached to the vehicle or battery clips may be attached for portability Discharge port is a standard garden hose connector and the macerator section grinds waste down to a...
134 item(s)
+

$447.09 $387.99
360 rotating head. Self-priming Capable of extensive dry running. Filter-less design. Quiet running. Corrosion-resistant parts. Compiles w/USCG 183.410 & ISO 8846 Marine. 1-1/2'' ports and no requirement for a pre-filter, black water can be moved easily at flow rate of 5 GPM. MFG# 50890-1000 508901000 UPC#...
39 item(s)
+