Epoxy & Fiberglass

$1,343.52 $1,141.99
15 oz. non-woven E glass fabric. Two layers, 45 fiber orientation. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet-out. 73820 : The same as 737 fabric with a .75 oz./sq. ft. mat backing MFG# 738-20 73820 UPC# 811343011871
4 item(s)
+

$1,051.75 $893.99
15 oz. non-woven E glass fabric. Two layers, 45 fiber orientation. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet-out. 73820 : The same as 737 fabric with a .75 oz./sq. ft. mat backing MFG# 73720 UPC# 811343011864
1 item(s)
+

$939.99 $798.99
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color. MFG# 407-B 407B UPC# 811343011581
14 item(s)
+

$681.16 $578.99
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump...
4 item(s)
+

$654.11 $555.99
A toughened versatile liquid epoxy for permanent waterproof bonding of fiberglass ceramics metals plastics damp and difficult-to-bond woods. With a modulus of elasticity of 150000 PSI it is a bit more flexible than standard epoxies and polyester but much stiffer than adhesive sealants. Makes structural bonds that...
11 item(s)
+

$627.05 $532.99
A toughened versatile liquid epoxy for permanent waterproof bonding of fiberglass ceramics metals plastics damp and difficult-to-bond woods. With a modulus of elasticity of 150000 PSI it is a bit more flexible than standard epoxies and polyester but much stiffer than adhesive sealants. Makes structural bonds that...
24 item(s)
+

$579.87 $492.89
A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to...
14 item(s)
+

$534.11 $453.99
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
7 item(s)
+

$529.02 $449.67
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
2 item(s)
+

$494.40 $420.24
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than #407 low-density filler or micro balloons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color. MFG#...
21 item(s)
+

$371.23 $368.90
A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator 1/4" I.D. Vacuum Tubing (10') Vacuum Gauge (1) Junction "T" barbs (2) Release Fabric (15 sq. ft.) Breather Fabric (15 sq. ft.) Vacuum Bag Film (15 sq. ft.) Vacuum Bag Sealant (25') Complete kit...
5 item(s)
+

$393.44 $334.42
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color. MFG# 404-B 404B UPC# 811343011437
4 item(s)
+

$391.75 $332.99
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color. MFG#...
23 item(s)
+

$304.85 $259.12
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
10 item(s)
+

$287.05 $243.99
Produces rapid cure. Use with 105 resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with #300 pumps. MFG# 205-C 205C UPC# 811343010584
169 item(s)
+

$266.35 $226.40
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
7 item(s)
+

$197.87
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves...
5 item(s)
+

$198.81 $168.99
A toughened versatile liquid epoxy for permanent waterproof bonding of fiberglass ceramics metals plastics damp and difficult-to-bond woods. With a modulus of elasticity of 150000 PSI it is a bit more flexible than standard epoxies and polyester but much stiffer than adhesive sealants. Makes structural bonds that...
66 item(s)
+

$164.69 $139.99
A unique tool for cutting accurate scarf joints in plywood up to 3/8" thick. Attaches easily to most circular saws and is simple to remove. MFG# 875 UPC# 811343012441
4 item(s)
+

$159.99 $135.99
Lightweight polyester blanket that provides excellent air passage within vacuum envelope while it absorbs excess epoxy. MFG# 88110 UPC# 811343012496
Out-of-stock

$137.64 $116.99
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to...
1676 item(s)
+

$136.46 $115.99
Use with 105 resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as #206 slow hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides...
103 item(s)
+

$116.46 $98.99
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural...
201 item(s)
+

$111.75 $94.99
15 oz. non-woven E glass fabric. Two layers at a 45 fiber orientation are held together by a light stitching. Flat, non-crimped fibers yield reduced print-through and higher stiffness than woven fabrics. Ideal for repairs, tabbing and reinforcing. MFG# 727-20 72720 UPC# 811343011741
43 item(s)
+

$109.40 $92.99
An easy to use 2-part system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts together while standard epoxy bonds cure. Bonds to wood, fiberglass and metal. Not recommended for long term bonds subject to high loads or moisture. Cures in 3-5 minutes. MFG# 865-16 86516...
158 item(s)
+

$108.22 $91.99
Added at 15-20% by volume to other coatings to provide limited protection from ultraviolet light or as a base for subsequent painting. Increases hardness of coated surface. Color is Metallic Grey. MFG# 42036 UPC# 811343012960
30 item(s)
+

$99.99 $84.99
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance. MFG# 729 UPC# 811343011789
36 item(s)
+

$97.64 $82.99
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color. MFG# 407-15 40715 UPC# 811343011567
233 item(s)
+

$95.12 $80.85
Large-volume applicators for use with a standard caulking gun. Great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Suitable for refilling during continuous use. Should be disposed of after epoxy cure.  24 pack. MFG# 810-24 81024 UPC# 811343012236
44 item(s)
+

$92.93 $78.99
Lightweight and seamless. Tough vinyl for excellent finger sensitivity and dexterity. MFG# 832-50 83250 UPC# 811343012311
45 item(s)
+

$90.58 $76.99
Produces rapid cure. Use with 105 resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with #300 pumps. MFG# 205-B 205B UPC# 811343010577
1039 item(s)
+

$83.52 $70.99
Use with 105 resin, 5:1, yields high strength, rigid, moisture resistant solid. Pot life at 72° F is 20 to 25 minutes. Use with #300 Pumps. US SALES ONLY. MFG# 206-B 206B UPC# 811343010614
846 item(s)
+

$81.16 $68.99
A handy disposable brush with a 6" metal handle. Used for a wide variety of gluing and coating. MFG# 803-144 803144 UPC# 811343012052
72 item(s)
+

$68.22 $57.99
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than #407 low-density filler or micro balloons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color. MFG#...
167 item(s)
+

$56.00
207 Special Clear Hardener™ was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding...
276 item(s)
+

$63.52 $53.99
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color. MFG# 404-45 40445 UPC# 811343011413
80 item(s)
+

$53.63 $52.99
Hardcover. 406 pages. Extensive chapters on hardware bonding, construction methods, safety and tools are described with the aid of hundreds of detailed illustrations and photographs. Used as a textbook in boatbuilding schools. MFG# 002 UPC# 811343012816
27 item(s)
+

$51.34
Use with 105 resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as #206 slow hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides...
78 item(s)
+

$59.99 $50.99
MFG# 650-K 650K UPC# 811343012168
108 item(s)
+

$58.81 $49.99
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves...
36 item(s)
+

$49.97
105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent...
938 item(s)
+

$57.64 $48.99
MFG# 655-K 655K UPC# 811343012397
230 item(s)
+

$57.64 $48.99
A proprietary blend designed to improve cured epoxy?s moisture-exclusion effectiveness. Also increases epoxy?s abrasion resistance and is an excellent additive for providing barrier coating to help prevent gelcoat blistering. MFG# 422-16 42216 UPC# 811343011673
41 item(s)
+

$57.64 $48.99
Repairs minor cracks and holes. Repairs scrapes and dings. Makes high-strength bonds and re-attaches loose hardware . This kit includes all the materials required to complete a range of repairs to fiberglass boats. Contains: 105 resin/205 hardener packets adhesive filler and adhesive fairing mixing cups reusable...
398 item(s)
+

$54.11 $45.99
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color. MFG#...
200 item(s)
+

$52.67 $44.77
A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to...
368 item(s)
+

$50.87 $43.24
A very fine black powder which can be mixed with WEST SYSTEM epoxy to produce a low friction exterior coating surface. Increases scuff resistance and durability. Mixture is also used on rudders, centerboards and racing craft bottoms that are dry sailed. Is not an antifoulant. Provides a mar resistant surface....
43 item(s)
+

$48.22 $40.99
Perfect for filleting or for scraping excess epoxy from surfaces. Reusable. MFG# 804-60 80460 UPC# 811343012090
349 item(s)
+

Help

Have any questions on our products?  Feel free to contact us.