Trim Tabs & Kits

$887.05 $753.99
AutoTrim Pro automatically levels the pitch and roll of your boat, adjusting your trim tabs to changes in vessel speed, sea conditions and shifting weight. Enjoy the convenience of riding in auto mode, or shift to full manual mode anytime. Inside: ATP control unit, ATP helm display, Plug and play waterproof...
28 item(s)
+

$1,318.81 $1,120.99
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades requiring less transom height...
33 item(s)
+

$201.29 $158.99
Replacement Edge Mt. trim tab blade, 9" x 12" MFG# 20158-001 20158001 UPC# 874847003919
40 item(s)
+

$275.28 $233.99
Superior seal design inspired by over 50 years of Bennett's proven success in hydraulic trimming techniques Robust, water-tight black nylon actuator provides trouble-free operation for years to come Completely waterproof, submersible and maintenance-free No...
56 item(s)
+

$307.49 $274.99
Superior seal design inspired by over 50 years of Bennett's proven success in hydraulic trimming techniques Robust, water-tight black nylon actuator provides trouble-free operation for years to come Completely waterproof, submersible and maintenance-free No...
35 item(s)
+

$239.99 $205.99
Simple, fully automatic trim and stabilizer system. Smart Tabs&#153 react to the water pressure, boat speed and payload. At slow speeds they deploy downward which increases stern lift, keeping the boat more level and allowing it to plane easier at much slower speeds. At cruising speeds they are pushed up by the...
5 item(s)
+

$49.95 $46.99
Assembly allows Smart Tabs to be set in two different positions without the use of any additional tools. When the bracket handle is in the down position the Smart Tabs will function as trim tabs. When the bracket handle is in the up position they will be fully retracted. The brackets are ideal for use when rack...
4 item(s)
+

$2,084.19 $1,875.99
MFG# 15049-101 15049101 UPC# 874847004718
Out-of-stock

$179.99 $154.99
With no hydraulics and no electrical switches Smart Tabs are a one of a kind solution for performance problems. The trim plates are held down at slow speeds to maximize lift and reduce bow rise then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting...
3 item(s)
+

$1,380.99 $1,288.99
MFG# ST12 UPC# 666285145005
2 item(s)
+

$1,493.99 $1,375.99
MFG# ST16 UPC# 666285146002
4 item(s)
+

$968.89 $897.99
COMPLETE TRIM TAB KIT with SWITCH KIT EDGE MOUNT SERIES Size: 12''x12''E. Double Rocker #122 switch included.   MFG# 15102-104 15102104 UPC# 874847006187
18 item(s)
+

$807.29 $747.99
MFG# 15088-101 15088101 UPC# 874847005647
21 item(s)
+

$1,088.69 $997.99
MFG# 15039-101 15039101 UPC# 874847004619
13 item(s)
+

$807.29 $747.99
MFG# 15089-102 15089102 UPC# 874847005647
18 item(s)
+

$870.58 $739.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
25 item(s)
+

$808.22 $686.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
34 item(s)
+

$874.99 $807.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
9 item(s)
+

$810.49 $750.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
38 item(s)
+

$766.99 $694.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
58 item(s)
+

$820.79 $759.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
7 item(s)
+

$746.49 $701.99
All Plug & Play installation. Fast response electric actuators for precise control. Fully submersible. Self-locking ball screw will not drift, even while backing down. Laser cut, stainless steel trim tab blade & hinge. High-impact, corrosion-proof mounts. Each kit contains (2) actuators with 6' wires, all required...
58 item(s)
+

$767.49 $721.99
Designed to fit on transoms with limited space due to boarding ladders & swim platforms. Kit contains: (2) 14 gauge stainless stell trim tab planes, (2) actuators w/6' wires & Deutsch plugs, (2) 20' actuator extension harnesses, (2) Upper mounting brackets w/gland seals, (2) Lower mounting brackets and all necessary...
12 item(s)
+

$43.52 $36.99
TORQUE TAB TORQUE TAB Counters torque pressure on wheel. Inexpensive & easy-to-install. Cast aluminum with stainless hardware. MFG# TAB-1-DP TAB1DP UPC# 733572003307
44 item(s)
+

$169.99 $148.99
Incorporates all of the fully automatic features of the Smart Tabs™, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and installation in a few minutes. Tools required are a drill with a 3/16'' bit & a Phillips screwdriver. Ideal for use on...
26 item(s)
+

$150.58 $127.99
Incorporates all of the fully automatic features of the Smart Tabs™, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and installation in a few minutes. Tools required are a drill with a 3/16'' bit & a Phillips screwdriver. Ideal for use on...
18 item(s)
+

$239.99 $205.99
Simple, fully automatic trim and stabilizer system. Smart Tabs™ react to the water pressure, boat speed and payload. At slow speeds they deploy downward which increases stern lift, keeping the boat more level and allowing it to plane easier at much slower speeds. At cruising speeds they are pushed up by the...
2 item(s)
+

$987.05 $838.99
SPORT TABS SPORT TABS For moderate performance use around 60 MPH. Heavy-gauge, reinforced black-coated stainless steel. 2 actuating cylinders per trim tab. Includes heavy-duty mounting plates, fasteners, rocker switch control. Recommended for boats below 25 ft. MFG# M80-SV M80SV UPC# 666285145500
5 item(s)
+

$79.99 $78.99
TRIM HANDLE TRIM HANDLE Puts tilt & trim control directly onto throttle lever. Weatherproof 50-amp switches. Fits pre-1979 OMC control handles. MFG# EJT-1-DP EJT1DP UPC# 733572003703
47 item(s)
+

$179.99 $154.99
Simple, fully automatic trim and stabilizer system. Smart Tabs™ react to the water pressure, boat speed and payload. At slow speeds they deploy downward which increases stern lift, keeping the boat more level and allowing it to plane easier at much slower speeds. At cruising speeds they are pushed up by the...
2 item(s)
+

$27.05 $22.99
Replacement part for Mercury Marine #31640Q1 316740A1 and Honda #41107-ZW1-003ZA Standard design and 2-1/2" long MFG# 18-6011 186011 UPC# 030999320209
36 item(s)
+

$890.58 $756.99
COMPLETE TRIM TAB KIT with SWITCH KIT STANDARD SERIES Size: 9''x12''. Double Rocker #122 switch included. MFG# 15101-104 15101104 UPC# 874847006170
56 item(s)
+

$442.39 $432.99
BRK ELECTRIC RETROFIT KIT for BENNETT TRIM TABS 12 Volt. Kit includes everything necessary to upgrade your current boat w/out any drilling or filling. Simply discard the hydraulic pump unit & the 2 Bennett cylinders. Install the 2 Lenco™ electric actuators (6' leads) with the new-style upper...
60 item(s)
+

$1,006.99 $939.99
MFG# 1212E UPC# 666285121603
10 item(s)
+

$1,041.69 $972.99
MFG# 1812E UPC# 666285125601
5 item(s)
+

$1,039.99 $883.99
MFG# M120 UPC# 666285146606
5 item(s)
+

$1,091.69 $1,018.99
MFG# ST9 UPC# 666285116005
5 item(s)
+

$568.89 $534.99
Economical, easy installation alternative to replacing Lenco actuator or purchasing an entire trim tab system. Uses existing Lenco trim planes. No need to patch or re-drill mounting holes. Bennett control fits and covers existing Lenco switch cutout. MFG# V351LK UPC# 666285328750
18 item(s)
+

$903.49 $807.99
MFG# 15103-104 15103104 UPC# 874847000147
22 item(s)
+

$1,057.69 $944.99
MFG# 15105-102 15105102 UPC# 874847000161
32 item(s)
+

$822.89 $761.99
MFG# 15014-101 15014101 UPC# 874847004367
22 item(s)
+

$1,124.59 $1,017.99
MFG# 15106-102 15106102 UPC# 874847000178
9 item(s)
+

$188.22 $159.99
For small boats from 10 to 18 feet. Easy to Install: Nothing to do inside the boat - only the mounting of two actuators and two tabs at the transom. No template needed! Kit includes: Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge Two strong and flexible composite actuators All...
53 item(s)
+

$212.93 $180.99
For small boats from 10 to 18 feet. Easy to Install: Nothing to do inside the boat - only the mounting of two actuators and two tabs at the transom. No template needed! Kit includes: Two 14-gauge stainless steel trim tab assemblies with exclusive interlocking hinge Two strong and flexible composite actuators All...
177 item(s)
+

$816.69 $697.99
Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption laboring of engine wake and pounding. Increase speed and improve visibility and handling. Standard kit: contains two stainless steel trim tabs two actuators a hydraulic power unit all necessary wiring tubing hardware...
1 item(s)
+

$888.69 $741.99
Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption laboring of engine wake and pounding. Increase speed and improve visibility and handling. Standard kit: contains two stainless steel trim tabs two actuators a hydraulic power unit all necessary wiring tubing hardware...
1 item(s)
+

$874.11 $742.99
Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption laboring of engine wake and pounding. Increase speed and improve visibility and handling. Standard kit: contains two stainless steel trim tabs two actuators a hydraulic power unit all necessary wiring tubing hardware...
10 item(s)
+

$1,005.49 $938.99
Decreases the time in "transition mode" between displacement and planing. Reduce fuel consumption laboring of engine wake and pounding. Increase speed and improve visibility and handling. Standard kit: contains two stainless steel trim tabs two actuators a hydraulic power unit all necessary wiring tubing hardware...
2 item(s)
+

Product filters

Help

Have any questions on our products?  Feel free to contact us.