Shop our Catalog Store in East Ridge, TN

Categories

Motor Mounts, Brackets & Jack Plates

← Prev
1 2 3
Next →
Sort by Alphabetical: A to Z
24 Per Page
  • Save 5%
Barr 3/4 In. Stud Engine Mount 80006
$63.19 $59.99
3/4 in. Stud Engine Mount 5 in. base 4 1/2 in. tall Single rubber engine mount Adjustable both vertically and horizontally Each mount has a capacity of 350 lbs Rubber cushions are locked to the base The rubber base is oil and fuel resistant MFG# 80006
66 item(s)
+ −
  • Save 6%
Barr 5/8 In. Stud Engine Mount 80001
$59.29 $55.99
Single cushion rubber engine mount with 5/8 in. stud 5 in. base 4 1/2 in. tall Adjustable both vertically and horizontally Each mount has a capacity of 350 lbs. Rubber cushions are locked to the base The rubber base is oil and fuel resistant MFG# 80001
138 item(s)
+ −
  • Save 11%
Barr Swivel Elbow CM204142411
$409.00 $362.99
Swivel Elbow Used on Chrysler M383 M400 and M440 engines up to 1975 MFG# CM204142411
4 item(s)
+ −
  • Save 15%
Bob's Machine Shop Action Series Jac™ Plate, 6" Setback - 100106010
$1,942.34 $1,650.99
The pump is mounted inside the jack plate eliminating the need to mount anything inside the boat and saving space. The motor is stronger than any other internal jack plate and offers greater lifting speed and strength for heavy outboards up to 300HP or 625 lbs. even under full power. Automotive style grease nipples...
80 item(s)
+ −
  • Save 15%
CMC BA-130 Breakaway Jackplate 13003
$768.22 $652.99
Designed for duck hunters and/or fishermen that use their boat in shallow, stumpy areas. Allows small boats and motors to slide over submerged logs or debris at low speeds to get to a downed bird or favorite fishing hole. Rated for outboard motors up to a maximum of 130 H.P. Unit is mounted between the boat transom...
16 item(s)
+ −
  • Save 15%
CMC PL65HS High Speed Hydraulic Power-Lift® Transom Jack w/o Gauge - 65302
$1,535.28 $1,304.99
Made of 1/2" 6061 T6 alloy aluminum extrusions with stainless steel fasteners. Rated to lift V-6 300 HP max. motor. Hydraulic actuator is fully accessible without removing the engine and is completely self-contained with its own fluid reservoir. Made of 100% non-ferrous material, impervious to saltwater and...
25 item(s)
+ −
  • Save 15%
CMC Transom Clamp Motor Adapter Kit 13022
$165.87 $140.99
TRANSOM CLAMP MOTOR ADAPTER KIT TRANSOM CLAMP MOTOR ADAPTER KIT For quick, easy installation of motors mounted w/transom clamps. MFG# 13022 UPC# 739697130225
19 item(s)
+ −
  • Save 4%
COOK MFG 50012
$263.69 $253.99
MFG# 50012 UPC# 739697500127
26 item(s)
+ −
  • Save 5%
Cook Mfg Jackplate-Manual 10" - 61012
$753.99 $715.99
"One Piece Manual Features: Made of 6061 T6 extruded aluminum alloy Stainless steel fasteners for maximum strength and durability Centrally located adjustment screw for positive alignment 5" Vertical adjustment Designed to fit standard B.I.A. bolt pattern Rated for up to V6 outboards" MFG#...
10 item(s)
+ −
  • Save 23%
Cook Mfg Lower Transom Plate 20032
$55.79 $42.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20032 UPC# 739697200324
23 item(s)
+ −
  • Save 4%
COOK MFG Manual Two-Piece Power-Lift Transom Jack 40012
$395.59 $380.99
The 2-piece adjustable jack has 5" of slot adjustment at the motor mounting bracket and 1-1/2" of adjustment at the transom bracket. Made of 6061 T6 extruded aluminum alloy. Stainless steel fasteners for maximum strength and durability. Designed to fit standard B.I.A. bolt pattern without drill holes or making...
15 item(s)
+ −
  • Save 15%
COOK MFG Relay 7122
$54.11 $45.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7122: 12V40-amp relay has no skirt. MFG# 7122 UPC# 739697071221
6 item(s)
+ −
  • Save 15%
COOK MFG Relay 7493
$39.99 $33.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7493: 12V 80-amp relayhas a skirt, has replaced the 7312 relay and will plug into the same socket. Will not plug into the socket that was designed for the 7122. MFG# 7493 UPC#...
155 item(s)
+ −
  • Save 23%
COOK MFG Upper Transom Plate 20022
$62.29 $47.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20022 UPC# 739697200225
40 item(s)
+ −
  • Save 15%
Crusader Rear Engine Mount 97917
$221.16 $187.99
Rear Engine Mount MFG# 97917
10 item(s)
+ −
  • Save 15%
Crusader Single Mount Assembly 1" 97926
$116.46 $98.99
Crusader front engine isolator mount assembly 1 in. diameter shaft 2 1/2 in. shaft length 3 1/2 in. total height 1/2 inch mounting holes Original Crusader Replaces Crusader 87238, 96955, 97238, 97925 and 97926R MFG# 97926 MFG# 97926
31 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 2-1/2 DK6125
$64.69 $54.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6125 UPC# 808282300067
39 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 3-1/2 DK6135
$62.34 $52.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6135 UPC# 808282300074
31 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 4-1/2 DK6145
$96.46 $81.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6145 UPC# 808282300081
3 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$805.87 $684.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
Out-of-stock
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$848.22 $720.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
3 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$874.11 $742.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
5 item(s)
+ −
  • Save 15%
Indmar Tran Mount Complete S535011
$254.11 $215.99
TRAN MOUNT COMPLETE MFG# S535011
17 item(s)
+ −
  • Save 3%
Marinetech 4 Stroke Outboard Motor Bracket-10" 55-0410
$350.39 $340.99
PANTHER ™ 4-STROKE AUXILIARY OUTBOARD MOTOR BRACKET Durable, black-anodized aluminum bracket. Adjusts trolling or auxillary motor to 5 vertical running positions for changing water or load conditions. Hand-adjustable w/turn of knob. Features stainless steel torsion springs to counter- balance motor...
Out-of-stock
← Prev
1 2 3
Next →

Product filters

Help

Have any questions on our products?  Feel free to contact us.