Shop our Catalog Store in East Ridge, TN

Categories

Motor Mounts, Brackets & Jack Plates

Sort by Alphabetical: A to Z
96 Per Page
  • Save 5%
Barr 3/4 In. Stud Engine Mount 80006
$63.19 $59.99
3/4 in. Stud Engine Mount 5 in. base 4 1/2 in. tall Single rubber engine mount Adjustable both vertically and horizontally Each mount has a capacity of 350 lbs Rubber cushions are locked to the base The rubber base is oil and fuel resistant MFG# 80006
62 item(s)
+ −
  • Save 6%
Barr 5/8 In. Stud Engine Mount 80001
$59.29 $55.99
Single cushion rubber engine mount with 5/8 in. stud 5 in. base 4 1/2 in. tall Adjustable both vertically and horizontally Each mount has a capacity of 350 lbs. Rubber cushions are locked to the base The rubber base is oil and fuel resistant MFG# 80001
132 item(s)
+ −
  • Save 11%
Barr Swivel Elbow CM204142411
$409.00 $362.99
Swivel Elbow Used on Chrysler M383 M400 and M440 engines up to 1975 MFG# CM204142411
2 item(s)
+ −
  • Save 15%
Bob's Machine Shop Action Series Jac™ Plate, 6" Setback - 100106010
$1,942.34 $1,650.99
The pump is mounted inside the jack plate eliminating the need to mount anything inside the boat and saving space. The motor is stronger than any other internal jack plate and offers greater lifting speed and strength for heavy outboards up to 300HP or 625 lbs. even under full power. Automotive style grease nipples...
79 item(s)
+ −
  • Save 15%
CMC BA-130 Breakaway Jackplate 13003
$768.22 $652.99
Designed for duck hunters and/or fishermen that use their boat in shallow, stumpy areas. Allows small boats and motors to slide over submerged logs or debris at low speeds to get to a downed bird or favorite fishing hole. Rated for outboard motors up to a maximum of 130 H.P. Unit is mounted between the boat transom...
15 item(s)
+ −
  • Save 15%
CMC PL65HS High Speed Hydraulic Power-Lift® Transom Jack w/o Gauge - 65302
$1,535.28 $1,304.99
Made of 1/2" 6061 T6 alloy aluminum extrusions with stainless steel fasteners. Rated to lift V-6 300 HP max. motor. Hydraulic actuator is fully accessible without removing the engine and is completely self-contained with its own fluid reservoir. Made of 100% non-ferrous material, impervious to saltwater and...
24 item(s)
+ −
  • Save 15%
CMC Transom Clamp Motor Adapter Kit 13022
$165.87 $140.99
TRANSOM CLAMP MOTOR ADAPTER KIT TRANSOM CLAMP MOTOR ADAPTER KIT For quick, easy installation of motors mounted w/transom clamps. MFG# 13022 UPC# 739697130225
19 item(s)
+ −
  • Save 4%
COOK MFG 50012
$263.69 $253.99
MFG# 50012 UPC# 739697500127
25 item(s)
+ −
  • Save 5%
Cook Mfg Jackplate-Manual 10" - 61012
$753.99 $715.99
"One Piece Manual Features: Made of 6061 T6 extruded aluminum alloy Stainless steel fasteners for maximum strength and durability Centrally located adjustment screw for positive alignment 5" Vertical adjustment Designed to fit standard B.I.A. bolt pattern Rated for up to V6 outboards" MFG#...
10 item(s)
+ −
  • Save 23%
Cook Mfg Lower Transom Plate 20032
$55.79 $42.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20032 UPC# 739697200324
22 item(s)
+ −
  • Save 4%
COOK MFG Manual Two-Piece Power-Lift Transom Jack 40012
$395.59 $380.99
The 2-piece adjustable jack has 5" of slot adjustment at the motor mounting bracket and 1-1/2" of adjustment at the transom bracket. Made of 6061 T6 extruded aluminum alloy. Stainless steel fasteners for maximum strength and durability. Designed to fit standard B.I.A. bolt pattern without drill holes or making...
15 item(s)
+ −
  • Save 15%
COOK MFG Relay 7122
$54.11 $45.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7122: 12V40-amp relay has no skirt. MFG# 7122 UPC# 739697071221
2 item(s)
+ −
  • Save 15%
COOK MFG Relay 7493
$39.99 $33.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7493: 12V 80-amp relayhas a skirt, has replaced the 7312 relay and will plug into the same socket. Will not plug into the socket that was designed for the 7122. MFG# 7493 UPC#...
153 item(s)
+ −
  • Save 23%
COOK MFG Upper Transom Plate 20022
$62.29 $47.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20022 UPC# 739697200225
36 item(s)
+ −
  • Save 15%
Crusader Rear Engine Mount 97917
$221.16 $187.99
Rear Engine Mount MFG# 97917
10 item(s)
+ −
  • Save 15%
Crusader Single Mount Assembly 1" 97926
$116.46 $98.99
Crusader front engine isolator mount assembly 1 in. diameter shaft 2 1/2 in. shaft length 3 1/2 in. total height 1/2 inch mounting holes Original Crusader Replaces Crusader 87238, 96955, 97238, 97925 and 97926R MFG# 97926 MFG# 97926
34 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 2-1/2 DK6125
$64.69 $54.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6125 UPC# 808282300067
28 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 3-1/2 DK6135
$62.34 $52.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6135 UPC# 808282300074
28 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 4-1/2 DK6145
$96.46 $81.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6145 UPC# 808282300081
3 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$743.52 $631.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified...
4 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$805.87 $684.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
Out-of-stock
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$848.22 $720.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
4 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$874.11 $742.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
5 item(s)
+ −
  • Save 15%
Indmar Tran Mount Complete S535011
$254.11 $215.99
TRAN MOUNT COMPLETE MFG# S535011
17 item(s)
+ −
  • Save 3%
Marinetech 4 Stroke Outboard Motor Bracket-10" 55-0410
$350.39 $340.99
PANTHER ™ 4-STROKE AUXILIARY OUTBOARD MOTOR BRACKET Durable, black-anodized aluminum bracket. Adjusts trolling or auxillary motor to 5 vertical running positions for changing water or load conditions. Hand-adjustable w/turn of knob. Features stainless steel torsion springs to counter- balance motor...
Out-of-stock
  • Save 2%
Marinetech 4 Stroke Outboard Motor Bracket-16" 55-0416
$449.99 $442.99
PANTHER ™ 4-STROKE AUXILIARY OUTBOARD MOTOR BRACKET Durable, black-anodized aluminum bracket. Adjusts trolling or auxillary motor to 5 vertical running positions for changing water or load conditions. Hand-adjustable w/turn of knob. Features stainless steel torsion springs to counter-...
8 item(s)
+ −
  • Save 15%
Marinetech Systems/Panther/Navigator 20HP Outboard Motor Bracket 55-0021
$182.34 $154.99
Adjustable outboard motor bracket is designed for motors up to 20 HP or 120 lbs. max weight. Heavy duty, lightweight aluminum is designed for freshwater use on both power boats and sailboats. Manual operation - no power is required to raise & lower the auxiliary outboard motor. Spring loaded. 11" of travel with...
30 item(s)
+ −
Panther Aux Motor Brkt-Fixed Model 435 55-0435
$551.59 $550.99
Provides Panther Durability in a non-powered auxiliary bracket. Adjustable to 7.5? and 13? setback options. The 55-435 can be upgraded to a electro-mechanical tilt unit at any time. Allows, jet or high side outboard applications. MFG# 55-0435 550435 UPC# 836125004353
2 item(s)
+ −
  • Save 15%
Panther Fixed Outboard Motor Bracket 550024
$144.69 $122.99
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket. MFG# 550024 UPC# 836125002243
25 item(s)
+ −
  • Save 1%
Panther Fixed Setback Plate 550220
$293.49 $289.99
Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard B.I.A. bolt pattern but is drillable for non-standard...
7 item(s)
+ −
  • Save 5%
Panther Motor Mount Bolt Bar 559100
$35.89 $33.99
Made from heavy duty 713 cast aluminum chromate dipped and black powder coated. Will add support for your transom when mounting your main or auxiliary motors. MFG# 559100 UPC# 836125009105
4 item(s)
+ −
  • Save 15%
Panther O/B Bracket Alum Fixed 25 Hp 55-0027
$447.05 $379.99
Heavy duty aluminum bracket with height adjustment is designed to hold 2 and 4 stroke motors weighing up to 150lbs. In addition, the model 27 has a 5? height adjustment to accommodate short shaft motors. 8-1/2? setback - weighs 13lbs. MFG# 55-0027 550027 UPC# 836125000270
6 item(s)
+ −
  • Save 15%
Panther O/B Bracket-Al Adj 15Hp 4St 550407AL
$375.28 $318.99
Adjustable heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks heavy-duty stainless steel torsion springs for easy lifting and stainless steel hardware. The 2" thick...
4 item(s)
+ −
  • Save 15%
Panther O/B Bracket-SS Adj 15Hp 4St 550408SS
$437.64 $371.99
Adjustable heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks heavy-duty stainless steel torsion springs for easy lifting and stainless steel hardware. The 2" thick...
5 item(s)
+ −
  • Save 5%
Panther Outboard Motor Bracket Ss 10Hp 55-0010
$172.19 $163.99
Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. For 2-Stroke motors only, not recommended for 4-Stroke outboards. MFG# 55-0010 550010 UPC# 836125000102
30 item(s)
+ −
  • Save 4%
Panther Outboard Motor Brkt-Alum-12Hp 55-0012
$215.19 $206.99
Heavy-duty, light weight aluminum motor brackets are designed for fresh water use on both power and sail boats. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines. MFG# 55-0012 550012 UPC# 836125000263
34 item(s)
+ −
  • Save 15%
Panther Static Motor Mount Plate 55-0405
$332.93 $282.99
Bracket makes mounting auxiliary and long shaft motors a snap. When direct to transom motor mounting is difficult; plate provides a flat, secure mounting surface for clamp-on or bolt-on. Kicker motors up to 40 hp or 150 lb. Made of solid cast aluminum with an 8" x 7" mounting area, the bracket can be used on most...
3 item(s)
+ −
  • Save 15%
Panther Swim Platform Outboard Motor Bracket For 2 and 4 Stroke Motors Up To 15 HP 55...
$492.93 $418.99
Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2- and 4-stroke. Constructed of hard-coat anodized aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimal prop depth and performance. Constructed of anodized aluminum. Comes complete with...
23 item(s)
+ −
  • Save 15%
SIERRA Mounting Kit 18-8520
$31.75 $26.99
Mounting Kit MFG# 18-8520 188520 UPC# 808282127169
7 item(s)
+ −
  • Save 15%
SIERRA Mounting Kit 18-8535
$22.34 $18.99
Mounting Kit MFG# 18-8535 188535 UPC# 808282127275
30 item(s)
+ −
  • Save 5%
SIERRA Mounting Kit Crusader 18-8519
$93.39 $88.99
Mounting Kit Crusader MFG# 18-8519 188519 UPC# 808282127152
5 item(s)
+ −
  • Save 5%
SIERRA Mounting Kit Crusader 18-8523
$80.89 $76.99
Mounting Kit Crusader MFG# 18-8523 188523 UPC# 808282127190
20 item(s)
+ −
  • Save 15%
SIERRA Mounting Kit Crusader 18-8547
$37.64 $31.99
Mounting Kit Crusader MFG# 18-8547 188547 UPC# 808282145644
18 item(s)
+ −
  • Save 1%
SIERRA Mounting Kit-Ex Man Volvo 50-57L 18-8511
$46.49 $45.99
Mounting Kit-Ex Man Volvo 5.0-5.7L MFG# 18-8511 188511 UPC# 808282127077
3 item(s)
+ −
  • Save 15%
SIERRA Mounting Package 18-4361
$18.81 $15.99
Mounting Package MFG# 18-4361 184361 UPC# 030999753991
5 item(s)
+ −
  • Save 15%
SIERRA Mounting Package 18-4364
$25.87 $21.99
Mounting Package MFG# 18-4364 184364 UPC# 030999754028
34 item(s)
+ −
  • Save 15%
SIERRA Mounting Package Chrysler s3745220 18-4360
$19.99 $16.99
Mounting Package Chrysler s3745220 MFG# 18-4360 184360 UPC# 030999753984
7 item(s)
+ −
  • Save 20%
Springfield Reg Transom Tuffner Size 2" x 15" 1780223
$68.59 $54.99
TRANSOM TUFF'NER Saves transom from biting and cracking. Adds strength and longevity to boat transom by evenly distributing forces during fast starts, high speed runs and sharp turns. Quality cast in Almag 35 aluminum for noncorrosive strength. Black and silver finish. Size 2" x 15" MFG# 1780223 UPC#...
20 item(s)
+ −
  • Save 12%
Swivl-EZE Lock N Stow Motor Support Bracket - 10107
$164.99 $145.99
LOCK N STOW MOTOR SUPPORT BRACKET LOCK'N-STOW®MOTOR SUPPORT BRACKET Attaches directly to motor in 2 locations, to serve as stabilizer. One end has two spring-loaded pins designed to fit into existing parallel holes found on engine's mounting bracket., other end has 2 receivers-sockets made to fit the bolts & nuts...
34 item(s)
+ −
  • Save 11%
Swivl-EZE Lock N Stow Motor Support Bracket - 10108
$154.59 $136.99
LOCK N STOW MOTOR SUPPORT BRACKET LOCK'N-STOW®MOTOR SUPPORT BRACKET Attaches directly to motor in 2 locations, to serve as stabilizer. One end has two spring-loaded pins designed to fit into existing parallel holes found on engine's mounting bracket., other end has 2 receivers-sockets made to fit the bolts & nuts...
38 item(s)
+ −
  • Save 15%
T H MARINE 7050 HYD ACTUATOR ASSY TH-CMC - ELCT0078
$916.46 $778.99
MFG# ELCT0078 UPC# 739697070507
39 item(s)
+ −
  • Save 15%
T H MARINE T-H Marine Atlas Hydraulic Jack Plate for Outboards Up to 400HP AHJ-6VHD-DP
$2,814.11 $2,391.99
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as...
3 item(s)
+ −
  • Save 10%
T-H Marine Atlas Hydraulic Jack 10" AHJ-10V-DP
$2,197.39 $1,982.99
ATLAS™ HYDRAULIC JACKING PLATE Self-contained hydraulic pump system (2500 psi) built for today’s powerful outboards, even the heaviest of 4-strokes. No reservoir or lines to install. Bottom to top in less than 8 seconds. Innovative rod and slot lifting design - trouble free lifting action. High-tech...
54 item(s)
+ −
  • Save 10%
T-H Marine Atlas Hydraulic Jack 8" AHJ-8V-DP
$2,164.89 $1,945.99
ATLAS ™ HYDRAULIC JACKING PLATE Self-contained hydraulic pump system (2500 psi) built for today ’ s powerful outboards, even the heaviest of 4-strokes. No reservoir or lines to install. Bottom to top in less than 8 seconds. Innovative rod and slot lifting design - trouble free lifting action....
41 item(s)
+ −
  • Save 15%
T-H Marine Bolt Kit/Jacking Plate BK-1-DP
$45.87 $38.99
Bolt kit for mounting outboard engine to jack plates. Kit contains: 4 each 1/2"-13 x 3" long bolts - stainless steel 4 each 1/2"-13 lock nuts - brass with nylon insert 8 each 1/2"-flat washers - stainless steel MFG# BK-1-DP BK1DP UPC# 733572002201
413 item(s)
+ −
  • Save 13%
T-H Marine Hi-Performance Jack Plate Fixed 4in Aluminum JP-4FA-DP
$277.79 $240.99
HI-JACKER FIXED JACK PLATE Inexpensive short transom fix. Solid 3/8" aluminum extrusion 3-engine mount holes, 2 transom holes. Total vertical of 5-1/2". Max HP: 150. 4" setback. MFG# JP-4FA-DP JP4FADP UPC# 733572002065
81 item(s)
+ −
  • Save 13%
T-H Marine Jack Plate Aluminum JP-1A-DP
$454.59 $393.99
The Original - produced since 1980 T-H Marine brought this first, full production jack plate to the recreational boating.  The Hi-Jacker™ Jack Plate is the most recognized brand name in the industry from the company that pioneered the product. This plate is constructed of tough...
6 item(s)
+ −
  • Save 26%
T-H Marine Mini Jacker MJ-1-DP
$293.99 $218.99
MINI-JACKER MINI-JACKER&#8482 Clamp-style small outboard jack plate. Cast aluminum bracket. Marine grade transom block 4" setback. 3" vertical. Maximum weight: 150 lbs. Maximum HP: 35. MFG# MJ-1-DP MJ1DP UPC# 733572002300
119 item(s)
+ −
  • Save 13%
T-H Marine Pro Hi-Jacker 6in Aluminum JP-6PW-DP
$554.79 $480.99
PRO HI JACKER JACKING PLATE PRO HI-JACKER™ JACK PLATE   High Strength Aluminum – 3/8” Thick One-Piece Design – Top Adjust Locking Bars Allow One Wrench Adjust Maximum 175 HP Outboards 4” Vertical...
24 item(s)
+ −
  • Save 15%
T-H Marine Transom Support Plate TSP-1-DP
$41.16 $34.99
TRANSOM SUPPORT PLATE T-H MARINE TRANSOM SUPPORT PLATE 3/8" thick. Cast aluminum. Distributes stress of motor mounting bolts to protect transom.   Top bolt hole standard. MFG# TSP-1-DP TSP1DP UPC# 733572020502
722 item(s)
+ −
T-H Marine Transom Wedge TW-2-DP
$75.99
TRANSOM WEDGE TRANSOM WEDGE Fits all standard 4-bolt pattersn. Full contact between engine & transom. Adds 5 degree of tuck to transom angle. 2-1/4"Wx11-1/4"L-1-16" to 3/16"thick. MFG# TW-2-DP TW2DP UPC# 733572004700
65 item(s)
+ −
  • Save 15%
T.H. Marine Reverse Transom Wedge TW-3-DP
$91.75 $77.99
T-H MARINE REVERSE TRANSOM WEDGE Gains more "Bow up". Provides 5 degree positive tilt. Rugged cast aluminum. MFG# TW-3-DP TW3DP UPC# 733572050707
23 item(s)
+ −
  • Save 23%
Th Marine Atlas Gauge Kit for 4 8 Models Black w/Stainless Bezel FAGK1SSDP
$539.69 $414.99
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors. MFG# FAGK1SSDP UPC# 733572074253
1 item(s)
+ −
  • Save 23%
TH Marine Atlas Gauge Kit for 6 10 12 Models Black w/Black Bezel FAGK2DP
$539.69 $414.99
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors. MFG# FAGK2DP UPC# 733572074307
40 item(s)
+ −
  • Save 23%
TH Marine Atlas Gauge Kit for 6 10 12 Models Black w/Stainless Bezel FAGK2SSDP
$539.69 $414.99
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors. MFG# FAGK2SSDP UPC# 733572074352
7 item(s)
+ −
  • Save 12%
Th Marine Jackplate-Atlas Hyd 12 300Hp AHJ12VDP
$2,332.59 $2,060.99
MFG# AHJ12VDP UPC# 733572069600
12 item(s)
+ −
  • Save 3%
Th Marine O/B Clamp On Adaptor AHJMCMA
$199.39 $193.99
O/B Clamp On Adaptor MFG# AHJMCMA UPC# 733572073409
14 item(s)
+ −
  • Save 13%
TH Marine Z-Lock Manual Jack Plate 6" JPZ-6-DP
$668.69 $579.99
PRO HI-JACKER ™ Z-LOCK ™ MANUAL JACK PLATE Full 1/2'' thick aluminum material & Z-Lock ™ design provides maximum strength. Design prevents side slippage & movement. Easily adjusts up or down w/center bolt. Handles all V6 outboards - 300hp Max. SET BACK: 6'' MFG# JPZ-6-DP JPZ6DP...
22 item(s)
+ −
  • Save 26%
Wiring Harness AHJRELAYKIT2DP
$280.49 $207.99
Please see the TH Marine website for the most current application informatiion. MFG# AHJRELAYKIT2DP UPC# 733572083101
143 item(s)
+ −

Product filters

Help

Have any questions on our products?  Feel free to contact us.