Shop our Catalog Store in East Ridge, TN

Categories

Motor Mounts, Brackets & Jack Plates

← Prev
1 2
Next →
Sort by Alphabetical: A to Z
24 Per Page
  • Save 15%
CMC PL65HS High Speed Hydraulic Power-Lift® Transom Jack w/o Gauge - 65302
$1,535.28 $1,304.99
Made of 1/2" 6061 T6 alloy aluminum extrusions with stainless steel fasteners. Rated to lift V-6 300 HP max. motor. Hydraulic actuator is fully accessible without removing the engine and is completely self-contained with its own fluid reservoir. Made of 100% non-ferrous material, impervious to saltwater and...
25 item(s)
+ −
  • Save 4%
COOK MFG 50012
$263.69 $253.99
MFG# 50012 UPC# 739697500127
26 item(s)
+ −
  • Save 5%
Cook Mfg Jackplate-Manual 10" - 61012
$753.99 $715.99
"One Piece Manual Features: Made of 6061 T6 extruded aluminum alloy Stainless steel fasteners for maximum strength and durability Centrally located adjustment screw for positive alignment 5" Vertical adjustment Designed to fit standard B.I.A. bolt pattern Rated for up to V6 outboards" MFG#...
10 item(s)
+ −
  • Save 23%
Cook Mfg Lower Transom Plate 20032
$55.79 $42.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20032 UPC# 739697200324
23 item(s)
+ −
  • Save 4%
COOK MFG Manual Two-Piece Power-Lift Transom Jack 40012
$395.59 $380.99
The 2-piece adjustable jack has 5" of slot adjustment at the motor mounting bracket and 1-1/2" of adjustment at the transom bracket. Made of 6061 T6 extruded aluminum alloy. Stainless steel fasteners for maximum strength and durability. Designed to fit standard B.I.A. bolt pattern without drill holes or making...
15 item(s)
+ −
  • Save 15%
COOK MFG Relay 7122
$54.11 $45.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7122: 12V40-amp relay has no skirt. MFG# 7122 UPC# 739697071221
6 item(s)
+ −
  • Save 15%
COOK MFG Relay 7493
$39.99 $33.99
A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990. 7493: 12V 80-amp relayhas a skirt, has replaced the 7312 relay and will plug into the same socket. Will not plug into the socket that was designed for the 7122. MFG# 7493 UPC#...
155 item(s)
+ −
  • Save 23%
COOK MFG Upper Transom Plate 20022
$62.29 $47.99
Made of strong 3/8" 6061 T6 alloy aluminum (not cast aluminum), these transom plates eliminates bolts "biting" into transoms and can more evenly distribute loads on high performance engines. MFG# 20022 UPC# 739697200225
40 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 2-1/2 DK6125
$64.69 $54.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6125 UPC# 808282300067
39 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 3-1/2 DK6135
$62.34 $52.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6135 UPC# 808282300074
31 item(s)
+ −
  • Save 15%
Detwiler Jack Plate Mounting Bolt Kit 4-1/2 DK6145
$96.46 $81.99
Package includes 4 each: Stainless steel bolts brass nylock nuts and stainless steel washers. MFG# DK6145 UPC# 808282300081
3 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$805.87 $684.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
Out-of-stock
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$848.22 $720.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
3 item(s)
+ −
  • Save 15%
DETWILER SeaStar Manual Jack Plate With Side Locks For Engines Up to 300 HP Max Engin...
$874.11 $742.99
Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operation Handles either 2- or 4-stroke engines to 300 HP or 585 lbs. Standard B.I.A. mounting pattern for simplified installation Aircraft grade 6061-T6 aluminum alloy...
5 item(s)
+ −
Panther Aux Motor Brkt-Fixed Model 435 55-0435
$551.59 $550.99
Provides Panther Durability in a non-powered auxiliary bracket. Adjustable to 7.5? and 13? setback options. The 55-435 can be upgraded to a electro-mechanical tilt unit at any time. Allows, jet or high side outboard applications. MFG# 55-0435 550435 UPC# 836125004353
2 item(s)
+ −
  • Save 15%
Panther Fixed Outboard Motor Bracket 550024
$144.69 $122.99
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket. MFG# 550024 UPC# 836125002243
26 item(s)
+ −
  • Save 1%
Panther Fixed Setback Plate 550220
$293.49 $289.99
Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard B.I.A. bolt pattern but is drillable for non-standard...
7 item(s)
+ −
  • Save 5%
Panther Motor Mount Bolt Bar 559100
$35.89 $33.99
Made from heavy duty 713 cast aluminum chromate dipped and black powder coated. Will add support for your transom when mounting your main or auxiliary motors. MFG# 559100 UPC# 836125009105
6 item(s)
+ −
  • Save 15%
Panther O/B Bracket Alum Fixed 25 Hp 55-0027
$447.05 $379.99
Heavy duty aluminum bracket with height adjustment is designed to hold 2 and 4 stroke motors weighing up to 150lbs. In addition, the model 27 has a 5? height adjustment to accommodate short shaft motors. 8-1/2? setback - weighs 13lbs. MFG# 55-0027 550027 UPC# 836125000270
7 item(s)
+ −
  • Save 15%
Panther O/B Bracket-Al Adj 15Hp 4St 550407AL
$375.28 $318.99
Adjustable heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks heavy-duty stainless steel torsion springs for easy lifting and stainless steel hardware. The 2" thick...
4 item(s)
+ −
  • Save 15%
Panther O/B Bracket-SS Adj 15Hp 4St 550408SS
$437.64 $371.99
Adjustable heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks heavy-duty stainless steel torsion springs for easy lifting and stainless steel hardware. The 2" thick...
7 item(s)
+ −
  • Save 5%
Panther Outboard Motor Bracket Ss 10Hp 55-0010
$172.19 $163.99
Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. For 2-Stroke motors only, not recommended for 4-Stroke outboards. MFG# 55-0010 550010 UPC# 836125000102
30 item(s)
+ −
  • Save 4%
Panther Outboard Motor Brkt-Alum-12Hp 55-0012
$215.19 $206.99
Heavy-duty, light weight aluminum motor brackets are designed for fresh water use on both power and sail boats. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines. MFG# 55-0012 550012 UPC# 836125000263
36 item(s)
+ −
  • Save 15%
Panther Static Motor Mount Plate 55-0405
$332.93 $282.99
Bracket makes mounting auxiliary and long shaft motors a snap. When direct to transom motor mounting is difficult; plate provides a flat, secure mounting surface for clamp-on or bolt-on. Kicker motors up to 40 hp or 150 lb. Made of solid cast aluminum with an 8" x 7" mounting area, the bracket can be used on most...
3 item(s)
+ −
← Prev
1 2
Next →

Product filters

Help

Have any questions on our products?  Feel free to contact us.