Fuse Holders

$14.11 $11.99
Waterproof holder for 1/4" x 1-1/4" fuses. Ideal for marine applications where moisture is present. Case is heat-resistant for high amperage conditions. Molded, non-breakable plastic case with 8" wire loop. Push-together assembly. Includes one AGC fuse. MFG# 14341-3 143413 UPC# 022697002761
5 item(s)
+

$7.05 $5.99
MFG# 5060 UPC# 632085050603
115 item(s)
+

$9.40 $7.99
BLUE SEA SYSTEMS 3AG WATER-RESISTANT FUSE HOLDER Replaces fuse holder found in Contura Waterproof fuse panels. Will withstand the water exposures normally encountered in above deck applications: Salt spray, rain, hose washdowns, and momentary immersions. MFG# 5021 UPC# 632085050214
728 item(s)
+

$55.99 $51.99
Compact ATO ® /ATC ® fuse block consolidates branch circuits and eliminates the tangle of in-line fuses. Includes a clear insulating cover with label recesses. Uses Blue Sea small format labels and offers storage for one fuse, satisfies ABYC/USCG insulation requirements. Independent circuits allow some...
154 item(s)
+

$24.69 $20.99
BLUE SEA SYSTEMSWATERPROOF ATO® or ATC® IN-LINE 30A FUSE HOLDER - BLACKFor use w/ATO or ATC fuses. Supplied w/12 AWG pigtails. Maximum Fuse Amperage: 30A. Fuse sold separately. MFG# 5065 UPC# 632085050658
89 item(s)
+

$253.79 $209.99
Weather Deck 8 Position Gray Waterproof Fuse Panel Designed for flybridge and open cockpit applications Designed for 12 volt systems Panel cumulative rating: 100 Amperes Switch Type: Off/On toggle with waterproof boot Switch rating: 15 ampreres maximum Backlighting Voltage: 12 volts DC...
28 item(s)
+

$7.99
Water tight. Extra heavy duty weatherproof fuse holder with wire leads for easy hook-up. Fuse not included. MFG# 3028
242 item(s)
+

$10.58 $8.99
MFG# 3030
14 item(s)
+

$9.40 $7.99
MFG# 3033
56 item(s)
+

$8.22 $6.99
Panel mount. For 1/4" x 1 1/4" fuses. (fuses not included), with bayonet-type knob spring pressure contact. Complete with gasket and nut. For panels through 5/16". MFG# 3024
79 item(s)
+

$5.87 $4.99
Panel mount. Square face panel mount fuse holder. Accepts up to 10A fuses. MFG# 3025
15 item(s)
+

$5.99
In-Line, heavy duty holder with 4-1/2" of orange wire leads. Fuse included. MFG# 3026
85 item(s)
+

$4.69 $3.99
In-Line, heavy duty. Accommodates a variety of sizes. 6V and 12V application. Fuse not included. MFG# 3027
33 item(s)
+

$10.58 $8.99
Water resistant. Easy to install, easy to change ATO-ATC fuse holder. Used in most recreational vehicles. Comes with cap to seal out moisture. Brass electrical contacts. Fuse included. MFG# 3037
38 item(s)
+

$8.99
Water resistant. Easy to install, easy to change ATO-ATC fuse holder. Used in most recreational vehicles. Comes with cap to seal out moisture. Brass electrical contacts. Fuse included. MFG# 3036
238 item(s)
+

$14.11 $11.99
Watertight. Yellow neoprene fuse holder is waterproof and is to be used with AGC fuse. Sold in pairs. MFG# 3029
21 item(s)
+

$9.49 $8.99
MFG# 3032
61 item(s)
+

$9.40 $7.99
MFG# 3035
45 item(s)
+

$9.09 $8.99
MFG# 3034
32 item(s)
+

$10.58 $8.99
MFG# 3031
23 item(s)
+

$3.52 $2.99
MFG# ATC30
2 item(s)
+

$4.69 $3.99
MFG# F-20 F20
20 item(s)
+

$16.46 $13.99
MAR-LANATO/ATC FUSE HOLDER 14 GA. WIREMade of flexible PVC plastic, molded to 14 Gauge marine 105°C red wire, 8" long. Fuse not included. MFG# 2012-14C 201214C UPC# 039798212401
32 item(s)
+

$22.34 $18.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Standard: 8" long. MFG# 2011-10-30C 20111030C UPC# 039798211138
24 item(s)
+

$22.34 $18.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Dual: 10" long with a pocket for a spare fuse. MFG# 2013-10-30C 20131030C UPC# 039798213132
24 item(s)
+

$22.34 $18.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Standard: 8" long. MFG# 2011-12-20C 20111220C UPC# 039798211220
39 item(s)
+

$22.34 $18.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Dual: 10" long with a pocket for a spare fuse. MFG# 2013-12-20C 20131220C UPC# 039798213224
7 item(s)
+

$22.34 $18.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Standard: 8" long. MFG# 2011-14-15C 20111415C UPC# 039798211459
21 item(s)
+

$21.16 $17.99
8-16 gauge marine 105ºC red wire w/non-breakable heat-resistant plastic molded directly to the wire. Push together loop is great around damp & dusty environments. Dual: 10" long with a pocket for a spare fuse. MFG# 2013-14-15C 20131415C UPC# 039798213453
3 item(s)
+

$3.52 $2.99
MFG# 0965PT UPC# 035704509658
175 item(s)
+

$12.93 $10.99
MFG# 0969PT UPC# 035704509696
Out-of-stock

$18.81 $15.99
Molded, heat resistant, watertight in-line fuse holders. Made of non-breakable plastic. Includes fuse. Fits 1/4" x 1-1/4" fuses. Carded individually. MFG# 130 UPC# 785311001303
14 item(s)
+

$17.64 $14.99
Molded, heat resistant, watertight in-line fuse holders. Made of non-breakable plastic. Includes fuse. Fits 1/4" x 1-1/4" fuses. Carded individually. MFG# 120 UPC# 785311001204
19 item(s)
+

$14.11 $11.99
Molded, heat resistant, watertight in-line fuse holders. Made of non-breakable plastic. Includes fuse. Fits 1/4" x 1-1/4" fuses. Carded individually. MFG# 115 UPC# 785311001150
31 item(s)
+

$17.64 $14.99
Molded, heat resistant, watertight in-line fuse holders. Made of non-breakable plastic. Includes fuse. Fits 1/4" x 1-1/4" fuses. Carded individually. MFG# 150 UPC# 785311001501
9 item(s)
+

$5.87 $4.99
Round screw in cap is made of stamped brass and molded bakelite. MFG# 420502-1 4205021 UPC# 035514420174
53 item(s)
+

$21.16 $17.99
Molded, non-breakable plastic waterproof fuse holder specially for the marine environment. Includes fuse, plus a spare. Fits 1/4? x 1-1/4? fuses. MFG# 420562-1 4205621 UPC# 035514420709
33 item(s)
+

$18.81 $15.99
Molded, non-breakable plastic waterproof fuse holder specially for the marine environment. Includes fuse, plus a spare. Fits 1/4? x 1-1/4? fuses. MFG# 420563-1 4205631 UPC# 035514420365
26 item(s)
+

$21.16 $17.99
Molded, non-breakable plastic waterproof fuse holder specially for the marine environment. Includes fuse, plus a spare. Fits 1/4? x 1-1/4? fuses. MFG# 420564-1 4205641 UPC# 035514420716
Out-of-stock

$22.34 $18.99
Molded, non-breakable plastic waterproof fuse holder specially for the marine environment. Includes fuse, plus a spare. Fits 1/4? x 1-1/4? fuses. MFG# 420565-1 4205651 UPC# 035514420723
26 item(s)
+

$30.58 $25.99
Snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse. MFG# 420557-1 4205571 UPC# 035514420693
17 item(s)
+

$17.64 $14.99
Snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse. MFG# 420552-1 4205521 UPC# 035514420655
115 item(s)
+

$18.81 $15.99
Snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse. MFG# 420553-1 4205531 UPC# 035514420662
149 item(s)
+

$17.64 $14.99
WATERTIGHT IN-LINE FUSE HOLDER Injection molded PVC. Features snap tight connection for use in wet or semi-wet locations. Includes standard 1/4''x1-1/4'' glass fuse. AMPS: 20 WIRE GAUGE: 12 MFG# 420554-1 4205541 UPC# 035514420679
190 item(s)
+

$22.34 $18.99
WATERTIGHT IN-LINE FUSE HOLDER Injection molded PVC. Features snap tight connection for use in wet or semi-wet locations. Includes standard 1/4''x1-1/4'' glass fuse. AMPS: 30 WIRE GAUGE: 10 MFG# 420555-1 4205551 UPC# 035514420686
111 item(s)
+

$8.22 $6.99
Round with flush cap, spade terminal. 12volt/15amps. MFG# 420504-1 4205041 UPC# 035514424257
19 item(s)
+

$9.40 $7.99
Injection molded fiberglass reinforced nylon. Designed to accept automotive style spade- terminal fuses. ATO/ATC. MFG# 445199-1 4451991 UPC# 035514445054
149 item(s)
+

$37.64 $31.99
Combination multiple gang Bakelite fuse blocks with brass fuse clips and screws. Accepts standard 1/4" x 1-1/4" fuses. Fuses not included. This fuse block features a separate grounding terminal bar for circuit distribution to route and connect power or ground circuits Useful for consolidating multiple wires or...
47 item(s)
+