Bus Bars,Terminals & Blocks

$41.16 $34.99
Continuous Duty Relay R040 Replaces Volvo Penta number: 854357 12 volt 30 Amp MFG# R040 UPC# 693006002484
33 item(s)
+

$55.59 $50.99
MFG# 2127 UPC# 632085021276
388 item(s)
+

$43.52 $36.99
Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #8-32 Screw terminals w/captive star lock washers ensure a good connection. MFG# 2340 UPC# 632085023409
76 item(s)
+

$36.46 $30.99
Busbar 10 X 8-32 Screw Terminal with Cover The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Continuous amperage: 130 amperes AC/150 amperes DC Maximum Voltage Rating: 300 volts AC/48 volts DC Bus Material: Tin...
526 item(s)
+

$19.99 $16.99
BLUE SEA SYSTEMS ACCESSORY Cover for BusBar 2302 MFG# 2716 UPC# 632085027162
17 item(s)
+

$29.40 $24.99
BLUE SEA SYSTEMS ACCE4SSORY Cover for DualBus 2701 MFG# 2709 UPC# 632085027094
24 item(s)
+

$16.46 $13.99
BLUE SEA SYSTEMS ACCE4SSORY Cover for DualBus 2702 MFG# 2710 UPC# 632085027100
28 item(s)
+

$10.58 $8.99
ACCESSORY FOR MINIBUS 100 AMPERE COMMON BUS Cover for MiniBus 2304/2305 MFG# 2713 UPC# 632085027131
85 item(s)
+

$8.22 $6.99
BLUE SEA SYSTEMS ACCESSORY Cover for BusBar 2301/2303 MFG# 2715 UPC# 632085027155
18 item(s)
+

$41.16 $34.99
100-300 Amp SEA Fuse Block The most economical system for 100-300 Ampere fusing Supplied terminal boots insulate all conductive parts, satisfying ABYC/USCG requirements 5/16 in. stud terminals accept wire ring terminals up to 00 AWG Base Material Red Glass-Reinforced Nylon SEA Fuse 100-300...
86 item(s)
+

$8.22 $6.99
Jumpers allow creation of common circuits on independent connectors. Nickel-plated brass. Continuous amperage equivalent to matching block. 5 per package. MFG# 9217 UPC# 632085092177
364 item(s)
+

$39.99 $33.99
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC. MFG# 2315 UPC# 632085023157
47 item(s)
+

$28.22 $23.99
MINIBUS 100 AMPERE COMMON BUS Great for limited space applications in electronics cabinets & under dashboards. TYPE: 4x10-32 Stud Terminal MFG# 2305 UPC# 632085023058
174 item(s)
+

$52.93 $44.99
Easy to install 4 ATO ® /ATC ® fused circuits mounts directly on the battery terminal studs. Screw terminals for securing wires with ring terminals and insulating covers included. MFG# 5024 UPC# 632085050245
125 item(s)
+

$41.16 $34.99
Industry standard bus for hot distribution or negative collection circuits. MFG# 2303 UPC# 632085023034
279 item(s)
+

$9.40 $7.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2402 UPC# 632085024024
196 item(s)
+

$10.58 $8.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2502 UPC# 632085025021
238 item(s)
+

$21.16 $17.99
20 Amp 8 Circuit Terminal Block Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Bus Material: Nickel-Plated Brass Base Material: Nylon Screw Size: #6 Continuous Rating: 20 Amps AC/DC...
71 item(s)
+

$11.75 $9.99
Terminal Block JumpersPN:  9218Jumpers allow creation of common circuits on independent connectorsSPECIFICATIONSBus MaterialNickel-Plated BrassContinuous RatingEquivalent to matching blockProduct : BLUE SEA 9218 JUMPER TERMINAL 2400 SERIES Manufacturer : BLUE SEA SYSTEM Manufacturer Part No : 9218...
147 item(s)
+

$51.75 $43.99
BUS BAR 20 GANG WITH COVER IIndustry standard BusBar features tin-plated copper bus, 1/4" stainless steal studs and 8-32 terminal screws. Continuous rating 150 Amps AC/DC, maximum voltage 300 Volts AC, 48 Volts DC. 2 x 1/4-20 Studs and 20 x #8-32 terminal screws w/cover MFG# 2312 UPC# 632085023126
121 item(s)
+

$55.28 $46.99
    The industry standard busbar for positive distribution     The industry standard busbar for the collection of negative or AC ground circuits Continuous Rating: 130 Amps AC/150 Amps DC Maximum Voltage Rating: 300 volts AC/48 volts DC Bus Material:...
23 item(s)
+

$28.22 $23.99
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC. 2 x #10-32 studs and 5 x #8-32 terminal screws w/Cover MFG# 2314 UPC# 632085023140
292 item(s)
+

$43.52 $36.99
300 amp rating. Terminal boots insulate all conductive parts satisfying ABYC/USCG requirements. For use on systems up to 32V DC. Large 5/16'' stud terminals accept wire ring terminals up to 00 AWG. Red nylon glass reinforced base. MFG# 5005 UPC# 632085050054
572 item(s)
+

$34.11 $28.99
MRBF - Marine Rated Battery Fuse. Space-saving ignition protected fuse for 30 to 300 Ampere loads. Must use with Terminal Fuse Block (2151 or 5191). High Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Clear window - visual indication of blown condition. Color...
146 item(s)
+

$34.11 $28.99
Terminal Fuse Color: Light Blue Amperage: 40A - Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks - Ignition protectedsafe for installation aboard gasoline powered boats - Clear windowvisual indication of blown condition MFG# 5176 UPC# 632085051761
55 item(s)
+

$28.22 $23.99
MFG# 5177 UPC# 632085051778
17 item(s)
+

$34.11 $28.99
Electrical Supplies . Terminal Fuse Color: Yellow Amperage: 100A Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected-safe for installation aboard gasoline powered boats Clear window-visual indication of blown condition. MFG# 5183 UPC#...
200 item(s)
+

$83.79 $69.99
MFG# 5503 UPC# 632085055035
487 item(s)
+

$32.93 $27.99
Attributes Gang 10 Stud 1/4"-20 Terminal Screw #8-32 Industry standard bus for hot distribution or negative collection circuits. MFG# 2301 UPC# 632085023010
777 item(s)
+

$44.69 $37.99
Attributes Gang 20 Stud 1/4"-20 Terminal Screw #8-32 Industry standard bus for hot distribution or negative collection circuits. MFG# 2302 UPC# 632085023027
268 item(s)
+

$48.22 $40.99
BUSBAR 150 AMPERE COMMON BUS Industry standard bus for hot distribution or negative collection circuits. 4x1/4"-20 Terminal Stud. MFG# 2303 UPC# 632085023034
2 item(s)
+

$61.16 $51.99
COVER FOR MAXIBUS 2127 & 2128 MFG# 2719 UPC# 632085027193
4 item(s)
+

$46.99 $44.99
Combines negative and positive busses on one block, clear lexan lid snaps on to meet CG and ABYC insulation requirements. Features tin-plated copper bus and stainless steel hardware. MFG# 2723 UPC# 632085027230
46 item(s)
+

$28.22 $23.99
Combines negative & positive buses on one block. Continuous amperage: 100 amperes. Voltage rating: 48V, DC max: 300 volts/AC max:. MFG# 2701 UPC# 632085027018
497 item(s)
+

$47.05 $39.99
Combines negative & positive buses on one block. Clear Lexan lid snaps on to meet USCG & ABYC insulation requirements. 1/4'' stud, 5x10-32 screw terminal. MFG# 2722 UPC# 632085027223
366 item(s)
+

$83.79 $69.99
MFG# 5502 UPC# 632085055028
290 item(s)
+

$124.89 $114.99
The SafetyHub100 combines an ignition protected fuse block and integrated connecting plugs. It consolidates seven circuits from 1A - 200A, eliminates loose wires, and protects fuses from explosive fumes. The SafetyHub100 is ideal for vessels ranging from ski boats to offshore fishing boats. Three 30A-200A MIDI fuses...
32 item(s)
+

$39.99 $33.99
MFG# 5185 UPC# 632085051853
2 item(s)
+

$39.99 $33.99
MFG# 5187 UPC# 632085051877
5 item(s)
+

$34.11 $28.99
MFG# 5189 UPC# 632085051891
107 item(s)
+

$28.22 $23.99
MFG# 5190 UPC# 632085051907
64 item(s)
+

$29.40 $24.99
MFG# 5181 UPC# 632085051815
325 item(s)
+

$11.75 $9.99
Allows creation of common circuits on independent connectors. Nickel-plated brass. Continuous amperage - equivalent to matching block. MFG# 9216 UPC# 632085092160
55 item(s)
+

$55.28 $46.99
Economical system for 30-80 amp fusing. Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements. Accepts wire sizes 180 to 4 AWG from sides or bottom. For use on systems up to 32 VDC. Ring terminal screws compress fuse blades within blocks for extremely low resistance connections....
2 item(s)
+

$79.99 $73.99
MaxiBus 12 x #10 Terminal Screw Common Bus Max Amperage 100 Amps AC/DC Max Voltage 48 Volts DC, 300 Volts AC MFG# 2105 UPC# 632085021054
194 item(s)
+

$18.81 $15.99
Mini Bus 100 Amp Busbar · Continuous ampereage 100 amps AC · Voltage rating 300 volts AC maximum · 48 volts DC maximum · 6x8-32 screw terminal MFG# 2306 UPC# 632085023065
63 item(s)
+

$25.87 $21.99
MINIBUS 100 AMPERE COMMON BUS Great for limited space applications in electronics cabinets & under dashboards. TYPE: 5x8-32 Screw Terminal MFG# 2304 UPC# 632085023041
574 item(s)
+

$165.87 $140.99
Power Bar 600 Amp Cable Connector Continuous 545 Amperes AC Continuous 600 Amperes DC 300 volts AC maximum 48 volts DC maximum 4x3/8-16 stud terminal Weight 1.71 lbs MFG# 2104 UPC# 632085021047
334 item(s)
+

$230.58 $195.99
Power Bar 600 Amp Cable Connector · Continuous 545 Amperes AC · Continuous 600 Amperes DC · 300 volts AC maximum · 48 volts DC maximum · 8x3/8-16 stud terminal · Weight 3.42lbs MFG# 2107 UPC# 632085021078
41 item(s)
+

$14.11 $11.99
30 Amp 4 Circuit Terminal Block Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Bus material: Nickel-plated brass Base material: nylon Screw size: #8 Continuous rating: 30 Amps AC/DC...
309 item(s)
+

$39.99 $33.99
Terminal Fuse Block, 3/8" Mounting Hole, 1 Terminal Stud Performance Features New isolated stud design uses standard M8 (5/16") hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high...
602 item(s)
+

$10.58 $8.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2404 UPC# 632085024048
192 item(s)
+

$21.16 $17.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2410 UPC# 632085024109
104 item(s)
+

$30.58 $25.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2512 UPC# 632085025120
366 item(s)
+

$19.99 $16.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2506 UPC# 632085025069
327 item(s)
+

$25.87 $21.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2510 UPC# 632085025106
265 item(s)
+

$14.11 $11.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2406 UPC# 632085024062
133 item(s)
+

$21.16 $17.99
Closed-back design insulates power from mounting surface. Each screw pair is 1 isolated circuit. Jumpers allow creation of common circuits. MFG# 2508 UPC# 632085025083
252 item(s)
+

$39.99 $33.99
Combines negative & positive buses on one block. Continuous amperage: 100 amperes. Voltage rating: 48V, DC max: 300 volts/AC max:. MFG# 2702 UPC# 632085027025
241 item(s)
+

$63.52 $53.99
Corrosion-resistant construction. Brass terminals & terminal screws. Nickel plated phosphor bronze fuse clips. Accept all 3AG, all AGC & SFE 20 amp fuses, 1/4'' dia., 1-1/4'' long. Combo Fuse & Terminal Block: Solid brass bus bars. Common hot feed to 4 independently fused circuits. Common ground strip accommodates...
24 item(s)
+

$72.93 $61.99
Corrosion-resistant construction. Brass terminals & terminal screws. Nickel plated phosphor bronze fuse clips. Accept all 3AG, all AGC & SFE 20 amp fuses, 1/4'' dia., 1-1/4'' long. Combo Fuse & Terminal Block: Solid brass bus bars. Common hot feed to 4 independently fused circuits. Common ground strip accommodates...
2 item(s)
+

$56.46 $47.99
Solid brass busbar safely carries up to 150A. Two 1/4-20 brass studs w/hexnuts. 8-32 round head screws for attachment of wires. Two mounting holes accept No. 10 countersink flathead screws. Moisture-resistant molded thermoplastic insulator base. Width: 1-1/4''. Height: 1-1/32''. MFG# M-449-BP M449BP UPC#...
24 item(s)
+

$24.39 $22.99
Heavy duty black plastic molded base with ground bar. 30A @ 12V DC. MFG# 3051
7 item(s)
+

$6.49 $5.99
Contains 1 red and 1 black protector boot. Accommodates battery terminals w/o wing nut. MFG# 3065
62 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
48 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
38 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
34 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
33 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
29 item(s)
+

$8.22 $6.99
Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum Conductivity (101% IACS at 68F) Tin Plated for Corrosion...
24 item(s)
+

$11.75 $9.99
Opt. Accy. MFG# 3067
31 item(s)
+

$3.52 $2.99
Epoxy coated lead alloy terminals fit positive or negative posts. The universal design holds a cable or a strap. Removable plate for easy assembly. MFG# 5107 UPC# 841345151077
28 item(s)
+

$3.52 $2.99
Epoxy coated lead alloy terminals fit positive or negative posts. The universal design holds a cable or a strap. Removable plate for easy assembly. MFG# 5108 UPC# 841345151084
16 item(s)
+

$9.49 $8.99
Opt. Accy. MFG# 3019
40 item(s)
+

$14.19 $12.99
Heavy duty base. Brass fuse clips and contacts with #8-32 screws. For SFE 20A or 3AG series fuse. MFG# 3053
22 item(s)
+

$18.89 $17.99
Heavy duty base. Brass fuse clips and contacts with #8-32 screws. For SFE 20A or 3AG series fuse. MFG# 3054
28 item(s)
+

$11.25 $10.99
Opt. Accy. MFG# 3083
35 item(s)
+

$25.87 $21.99
Safe-Mate™ Industrial Battery Connectors are for use on battery powered equipment such as service vehicles, battery operated fork lifts, pallet jacks, sweepers, golf carts, etc. These connectors have a self-mating design, two of the connectors mate together. High impact polycarbonate...
7 item(s)
+

$124.39 $109.99
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as...
21 item(s)
+

$183.79 $149.99
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as...
32 item(s)
+

$267.09 $217.99
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as...
2 item(s)
+

$44.69 $37.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
74 item(s)
+

$43.52 $36.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
9 item(s)
+

$43.52 $36.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
15 item(s)
+

$31.75 $26.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
11 item(s)
+

$31.75 $26.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables. MFG#...
17 item(s)
+

$47.05 $39.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
11 item(s)
+

$44.69 $37.99
Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables....
3 item(s)
+

$50.09 $44.99
This patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link, or used as separate positive/negative bars. MFG# 777Z10W200 UPC# 843687006732
5 item(s)
+

$77.39 $68.99
This patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link, or used as separate positive/negative bars. MFG# 777Z18W200 UPC# 843687006756
2 item(s)
+

$36.46 $30.99
Multi-connection battery terminals. Terminate up to 4 electronic instruments on each set of terminals. Complete with quick-connect terminals. Positive molded in red, negative molded in black. All 1-piece. No screws or parts to lose. Cover snaps tight when closed. MFG# 12VTR UPC# 093344300431
28 item(s)
+

$136.49 $120.99
Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as...
16 item(s)
+

$19.99 $16.99
Pro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to allow for the most compact installations. The common interconnection height of Pro Installer components allow link bars to quickly and easily convert a group of different products into a functional...
16 item(s)
+

$42.34 $35.99
3, 4, 5, & 8 Stud Heavy Duty Busbars 778-ANLFuseholder ANL & Class T Double Stud Fuseholders EZ Mount Battery Switch On/Off LB-2 Single Insulated Studs LB-1 Double Insulated Studs MFG# 779-LB-BSS 779LBBSS UPC# 843687008606
3 item(s)
+

$28.22 $23.99
3, 4, 5, & 8 Stud Heavy Duty Busbars 778-ANLFuseholder ANL & Class T Double Stud Fuseholders EZ Mount Battery Switch On/Off LB-2 Single Insulated Studs LB-1 Double Insulated Studs MFG# 779-LB-EES 779LBEES UPC# 843687008613
2 item(s)
+

$19.99 $16.99
A range of linking bars to complement the Pro Installer range of products High purity copper, tin plated for optimum marine electrical performance Fastest, most economic way of connecting products Saves space, allows clustering for the most compact installations Links can be doubled for higher...
7 item(s)
+