Steering Parts & Accessories

$39.99 $33.99
Link your kicker motor to your main steering system with ease Works with all dual or single cable steering systems & on popular hydraulic systems Maneuver your boat while trolling, right from the steering wheel Quick & easy assembly allows you to...
33 item(s)
+

$15.28 $12.99
Provides organized, covered pass-thru for control cables, wires or fuel lines. Split side allows for installation without disconnecting controls. Includes tie for secure fit. Black rubber, UV-resistant construction with polypropylene attachment gasket ring. MFG# 12820-5 128205 UPC# 022697004994
97 item(s)
+

$503.28 $482.99
RUDDER PORT 1 1/4" MFG# 00RP125
2 item(s)
+

$32.93 $27.99
Offers superior rust and corrosion protection and offers greater stability at high and low temperatures. Recommended for steering cables, fishing reels, all gears, and all metals. MFG# 422 UPC# 011698042203
23 item(s)
+

$38.81 $32.99
Steering rod sealer & lubricator. Allows sticky, hard-to-move steering rods to be properly & easily lubricated for smooth, easy steering action. System includes: SS lubricating nut with -oil seal & grease (zerk) fitting. Keeps moisture & contaminants out, enables several types of lubricants to be poured or pumped...
63 item(s)
+

$222.89 $196.99
The rod consists of two stainless steel tubes. MFG# EZ10004 UPC# 739741100044
4 item(s)
+

$221.79 $195.99
The rod consists of two stainless steel tubes. MFG# EZ10002 UPC# 739741100020
2 item(s)
+

$128.22 $108.99
Evinrude E-Tec Bracket MFG# EZ76010 UPC# 739741760101
1 item(s)
+

$430.58 $365.99
Designed for auxiliary engines up to 25HP, with a kit to fit every outboard and outdrive engine. They also fit most sailboats! • Patented self-adjusting rod, which attaches between your main and auxiliary engines • All brackets are powder-coated stainless steel; all connectors are brass; tie-rod is...
1 item(s)
+

$49.40 $41.99
Inner Tube Ball Joint. MFG# EZ10400 UPC# 739741104004
2 item(s)
+

$98.19 $94.99
Mercruiser Alpha I Bracket Assembly MFG# EZ30010 UPC# 739741300109
10 item(s)
+

$163.09 $141.99
Mercruiser Bravo Bracket Assembly MFG# EZ35010 UPC# 739741350104
4 item(s)
+

$49.40 $41.99
The rod consists of two stainless steel tubes. MFG# EZ10300 UPC# 739741102007
3 item(s)
+

$44.69 $37.99
Restricting Tether 4-Stroke MFG# EZ18710 UPC# 739741187106
3 item(s)
+

$3,054.09 $2,662.99
Thrusters give you total control of your boat when docking and departing regardless of wind or current conditons. No reservoir to install no leaks and no maintenance High integrity seal Black box electronics protect motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission...
5 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
14 item(s)
+

$36.46 $30.99
For use in MCM compact hydraulic helm steering systems. Also used on Mercury Hydraulic Steering -Verado 135-200 and bolt-on steering system.   Single Quart MFG# 92-858078Q01 92858078Q01 UPC# 745061039490
924 item(s)
+

$110.59 $88.99
CONTROL ADAPTER KITS OEM CONTROL-SPECIFIC CONNECTION KIT FOR 3300 CABLES MFG# 301074 UPC# 731957258076
47 item(s)
+

$49.99 $39.99
CONNECTION KITS & ADAPTERS ENGINE-SPECIFIC CONNECTIN KITS FOR 3300 CABLES MFG# 301729 UPC# 731957243744
18 item(s)
+

$14.11 $11.99
TERMINAL EYES TERMINAL EYES MFG# 300646 UPC# 731957276162
275 item(s)
+

$47.05 $39.99
Auxiliary motor steering kit provides remote control steering for any type or size of outboard trolling motor up to 25 horse-power. Freshwater model is constructed of zinc plated steel saltwater model is stainless steel. MFG# 552401 UPC# 836125000393
27 item(s)
+

$18.81 $15.99
This connector rod is heavy duty 3/8" with long threaded ends for cut off to the exact length needed. Zinc plated steel. MFG# 553024
1 item(s)
+

$865.87 $735.99
These power steering units include just the power units w/o electronics and are designed to work seamlessly with the TrollMaster Pro 3 remote throttle/steering system. They allow you to steer the auxiliary or gas powered trolling motor from anywhere in your boat. The T4 systems (550102NE & 550103NE) will fit every...
3 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
12 item(s)
+

$464.69 $394.99
The Trolling Motor Tie Bar is 1/2" thick and along with the drive bracket composed entirely of stainless steel. Extremely heavy duty. The rod is fully threaded so it can be cut for custom installations. Fits U-Flex. MFG# 55-2900 552900 UPC# 836125000386
4 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
6 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
4 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
1 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
1 item(s)
+

$18.81 $15.99
Designed for trolling motor steering connectors. Features a spring action release. The ball stud is 3/8 - 24 thread by 7/8"L. The body is tapped for 3/8 - 24 threaded rod. Zinc plated steel. MFG# 9909028
4 item(s)
+

$995.28 $845.99
The T4 Electro-Steer features a unique solution to fit every kicker motor with a tilt tube. It installs in minutes thru the tilt tube and doesn't take any room away from your transom. Requires 9" between the main engine and kicker motor. Includes a 24' cable w/handheld remote for convenient use connecting rod...
7 item(s)
+

$144.69 $122.99
The Panther Drive Bracket is made of stainless steel and is the same bracket included with the Panther Model 55-2900 Trolling Motor Tie Bar Kit. The bracket attaches directly to the most common hydraulic steering units including Uflex and can be combined with our Model 55-2400 and 55-2600 for a professional...
2 item(s)
+

$274.11 $232.99
The T4 Electro-Steer features a unique solution to fit every kicker motor with a tilt tube. It installs in minutes thru the tilt tube and doesn't take any room away from your transom. Requires 9" between the main engine and kicker motor. Includes a 24' cable w/handheld remote for convenient use connecting rod...
15 item(s)
+

$44.69 $37.99
Fit most 4 stroke engines with motor specific kits. Kits are motor specific Includes (as needed): Servo motor Custom linkage connections Custom mount brackets Electrical connectors Installation Instructions MFG#...
3 item(s)
+

$35.19 $32.99
MFG# 690110
87 item(s)
+

$11.75 $9.99
Protects the output end of most steering cables. Cable opening is 3/8". MFG# 521700 UPC# 035514521055
46 item(s)
+

$65.87 $55.99
MFG# 230106-1 2301061 UPC# 035514230124
23 item(s)
+

$16.46 $13.99
Stainless steel bracket and eye pad. Feeds line onto anchor control system to avoid uneven line buildup. Carded. MFG# 0919341 UPC# 035514091039
21 item(s)
+

$17.64 $14.99
Protects the output end of most steering cables. MFG# 521700-1 5217001 UPC# 035514522137
22 item(s)
+

$32.93 $27.99
MFG# 28441 UPC# 719249284415
129 item(s)
+

$23.99
12 mm Replacement Nut MFG# 28431 UPC# 719249284316
137 item(s)
+

$34.11 $28.99
MFG# 28461 UPC# 719249284613
151 item(s)
+

$9.99
Black Plastic Center Cap MFG# 28591 UPC# 719249285917
166 item(s)
+

$9.40 $7.99
Seals off water intake and protects cables wiring and gas lines. Made of durable vinyl plastisol. MFG# 29300 UPC# 719249293004
312 item(s)
+

$49.40 $41.99
The Steering Guard should be installed on all cable and side-mounted hydraulic steering systems to lubricate, clean and seal the system. Will more than double the life of a new cable system. Made of stainless steel. Installs in 10 minutes. Eliminates greasy steering rods forever. MFG# 28261 UPC#...
84 item(s)
+

$50.58 $42.99
The Steering Guard should be installed on all cable and side-mounted hydraulic steering systems to lubricate, clean and seal the system. Will more than double the life of a new cable system. Made of stainless steel. Installs in 10 minutes. Eliminates greasy steering rods forever. MFG# 28251 UPC#...
421 item(s)
+

$12.93 $10.99
Heavy-duty rubber boot to fit over output end of steering cable at engine for complete protection from elements and preventing lubrication from being washed away. Fits all standard steering cables including Morse, Teleflex, Detmar, etc. Dimensions: 1" ID steering cable end, 3/8" ID output end, 1-1/2" overall...
458 item(s)
+

$17.64 $14.99
Teak Center Cap MFG# 28561 UPC# 719249285610
108 item(s)
+

$36.99 $34.99
Easily converts existing destroyer wheels to the most modern versions. Installation tool included. MFG# 28521 UPC# 719249285214
454 item(s)
+

$41.99 $39.99
Easily converts existing destroyer wheels to the most modern versions. Attractive and durable black plastic center. MFG# 28491 UPC# 719249284910
378 item(s)
+

$71.99 $54.99
MFG# KS06 UPC# 731957874535
2 item(s)
+

$63.09 $54.99
MFG# KS05
2 item(s)
+

$1,006.69 $879.99
MFG# HH5770-3 HH57703 UPC# 731957918871
20 item(s)
+

$1,301.49 $1,206.99
MFG# HH6190-3 HH61903 UPC# 731957918727
12 item(s)
+

$110.58 $93.99
MFG# HF6003 UPC# 731957909633
36 item(s)
+

$862.99 $795.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
28 item(s)
+

$576.69 $564.99
BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated to a MAXIMUM of 150 HP (total). Baystar Helms are equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation....
46 item(s)
+

$63.69 $50.99
Used in the field to adapt utility, neutral throttle, and vernier cables to mount in bulkhead or clamp applications. MFG# 300673 UPC# 731957250674
Out-of-stock

$1,174.99 $1,173.99
Unsurpassed performance and flexibility with smooth operation and feel, 48° of tilt and 5 lock positions. Fits most styled and formed dashes. Preloaded dual taper bearings ensure minimal excess free play. Standard 3/4" tapered shaft. No remote fill required. MFG# HH6541-3 HH65413 UPC# 731957918215
172 item(s)
+

$1,507.29 $1,397.99
Unsurpassed performance and flexibility with smooth operation and feel, 48° of tilt and 5 lock positions. Fits most styled and formed dashes. Preloaded dual taper bearings ensure minimal excess free play. Standard 3/4" tapered shaft. No remote fill required. MFG# HH6542-3 HH65423 UPC# 731957918765
28 item(s)
+

$96.99 $77.99
Teleflex hydraulic steering cylinder seal kit For Seastar BA 150-7TM, BA 150-9TM, and BA 150-9TMB inboard steering cylinders MFG# HS5182 UPC# 731957806390
1 item(s)
+

$63.09 $54.99
MFG# KS13 UPC# 731957874597
1 item(s)
+

$81.16 $68.99
SeaStar HA1205 SPA Retrofit Kit for Autopilot Pump Required to Mount to PA1200-2 Power Assist Pump MFG# HA1205 UPC# 731957898036
1 item(s)
+

$528.69 $490.99
MFG# HA6804 UPC# 731957910189
6 item(s)
+

$963.99 $836.99
This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. MFG# HC53263 UPC# 731957900722
1 item(s)
+

$933.39 $926.99
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are...
436 item(s)
+

$1,145.19 $1,032.99
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount...
Out-of-stock

$1,087.19 $980.99
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are...
33 item(s)
+

$1,145.19 $1,032.99
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount...
Out-of-stock

$1,044.49 $941.99
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount...
177 item(s)
+

$1,296.99 $1,169.99
The SeaStar front mount pivot cylinder is for Catamaran designs. This cylinder will fit ALL engines that require HC5345 steering cylinder. The internal o-ring is designed to limit the amount of fluid bypass decreasing the amount of re-alignment. This cylinder is best used in applications that require a liquid...
32 item(s)
+

$939.29 $870.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
23 item(s)
+

$1,164.29 $1,079.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
5 item(s)
+

$793.39 $787.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for positive rudder lock, patented...
279 item(s)
+

$977.59 $888.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
44 item(s)
+

$1,125.87 $956.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
12 item(s)
+

$978.69 $907.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for...
45 item(s)
+

$1,187.99 $1,101.99
Efficient, safe and reliable. Easy to install. Feature helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, 1/4" NPT port threads, internal pressure relief valve, front of dash fill, lock valve for positive rudder lock, patented...
4 item(s)
+

$76.46 $64.99
MFG# HS06
7 item(s)
+

$65.87 $55.99
All Older Style SeaStar manual hydraulic steering systems. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. (Seastar Solutions New Updated cylinders with part numbers ending in "-3" Use only ORB fittings listed separately. ) MFG# HF6004 UPC# 731957911681
132 item(s)
+

$101.16 $85.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
58 item(s)
+

$267.05 $226.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
37 item(s)
+

$48.22 $40.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
16 item(s)
+

$137.64 $116.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
4 item(s)
+

$47.19 $46.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
13 item(s)
+

$74.69 $59.99
These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB...
172 item(s)
+

$959.39 $855.99
BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated to a MAXIMUM of 150 HP (total). Baystar Helms are equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after...
11 item(s)
+

$1,382.59 $1,317.99
Teleflex tilt steering delivers unsurpassed performance and flexibility with smooth operation and feel, 48° of tilt, and 5 lock positions. Fits most styled and formed dashes. Preloaded dual taper bearings ensure minimal excess free play. Standard 3/4" tapered shaft. MFG# HH6491-3 HH64913 UPC#...
6 item(s)
+

$37.64 $31.99
Kit for Older model BayStar helms HH4016 & HH4015 w/plastic housing MFG# HS5147 UPC# 731957849397 MFG# HS5147 UPC# 731957849397
25 item(s)
+

$99.89 $85.99
SeaStar HS5183 Hydraulic Seal Kit Fits HC5319, HC5350 & HC5373. MFG# HS5183 UPC# 731957806406
2 item(s)
+

$109.40 $92.99
MFG# HF6002 UPC# 731957909626
Out-of-stock

$128.22 $108.99
MFG# HF6001 UPC# 731957909619
3 item(s)
+

$1,183.39 $1,035.99
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats...
29 item(s)
+

$132.93 $112.99
SH50941P: Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end...
104 item(s)
+

$190.58 $161.99
Single cable tilt helm for inboards and power-assisted stern drives. Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time,...
41 item(s)
+

$60.89 $47.99
MFG# CA27090P UPC# 731957090362
2 item(s)
+