Steering Parts & Accessories

$39.99 $33.99
Link your kicker motor to your main steering system with ease Works with all dual or single cable steering systems & on popular hydraulic systems Maneuver your boat while trolling, right from the steering wheel Quick & easy assembly allows you to...
40 item(s)
+

$15.28 $12.99
Provides organized, covered pass-thru for control cables, wires or fuel lines. Split side allows for installation without disconnecting controls. Includes tie for secure fit. Black rubber, UV-resistant construction with polypropylene attachment gasket ring. MFG# 12820-5 128205 UPC# 022697004994
85 item(s)
+

$63.69 $50.99
Used in the field to adapt utility, neutral throttle, and vernier cables to mount in bulkhead or clamp applications. MFG# 300673 UPC# 731957250674
Out-of-stock

$96.99 $77.99
Teleflex hydraulic steering cylinder seal kit For Seastar BA 150-7TM, BA 150-9TM, and BA 150-9TMB inboard steering cylinders MFG# HS5182 UPC# 731957806390
2 item(s)
+

$528.69 $490.99
MFG# HA6804 UPC# 731957910189
7 item(s)
+

$963.99 $836.99
This cylinder fits most most power and non-power assist sterndrives. It can be used on single and multiple drives with multiple steering station connection. This cylinder features simple autopilot interface. MFG# HC53263 UPC# 731957900722
1 item(s)
+

$37.64 $31.99
Kit for Older model BayStar helms HH4016 & HH4015 w/plastic housing MFG# HS5147 UPC# 731957849397 MFG# HS5147 UPC# 731957849397
20 item(s)
+

$60.89 $47.99
MFG# CA27090P UPC# 731957090362
1 item(s)
+

$539.59 $521.99
MFG# HO6821 UPC# 731957910127 Tie Bar, 25.0" - 25.7" (Single Cyl.) / 30.7" - 33.4" (Dual Cyl.) Tie Bar, 25.0" - 25.7" (Single Cyl.) / 30.7" - 33.4" (Dual Cyl.) Tie Bar, 25.0" - 25.7" (Single Cyl.) / 30.7" - 33.4" (Dual Cyl.) Tie Bar,...
Out-of-stock

$28.22 $23.99
Pivot for 4300 series cables MFG# 036361 UPC# 731957298805
6 item(s)
+

$690.79 $631.99
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Teleflex Extreme cable as the linkage between the two engines. Features: Flexible cable allows for adjustable locations of kicker motor Allows independent trim/tilt and...
3 item(s)
+

$333.79 $239.99
30' Baystar Tubing Kit MFG# HT4430H UPC# 731957891914
12 item(s)
+

$41.16 $34.99
Available: OMC Fits all Johnson Evinrude OMC motors (1979Present). Mercury O/B and I/O Fits Mercury Mercruiser, Mariner (1992 and newer 40hp and over) and Mercury Generation II (2002 and newer). MFG# CA27319P UPC# 731957084637
90 item(s)
+

$39.99 $33.99
Teleflex control cable connection kits for use with 3300 and 3300HP type cables. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters. Various kits available. MFG# CA27320P UPC# 731957084903
21 item(s)
+

$25.87 $21.99
3300 Series Ball Joint MFG# 031799001 UPC# 731957260192
52 item(s)
+

$697.49 $637.99
Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Teleflex Extreme cable as the linkage between the two engines. Features: Flexible cable allows for adjustable locations of kicker motor Allows independent trim/tilt and...
1 item(s)
+

$45.87 $38.99
4300 Series Ball Joint Cable   4300 Stud     9/16" Thread             1/4-28   MFG# 029104 UPC# 731957249708
10 item(s)
+

$59.99 $50.99
ADAPT KIT 30 LC MFG# NULL
4 item(s)
+

$182.19 $142.99
BAYSTAR™ O/B STEERING SYSTEM by TELEFLEX® REPLACEMENT PART Cylinder Pivot Plate (Honda) MFG# HA4641 UPC# 731957891167
2 item(s)
+

$47.05 $39.99
For throttle and shift control systems. Use with 3600 and 3300 HP cables. Fits Mercury Inboard. Allows quick installation and maximum adjustment at engine. Package includes throttle and shift adapters for one engine. MFG# CA27373P UPC# 731957085139
19 item(s)
+

$78.99 $63.99
SEASTAR ® 1.7 STEERING KIT by TELEFLEX ® OPTION TYPE: Backplate Kit MFG# HA5418 UPC# 731957800930
85 item(s)
+

$35.99
BACK MOUNT REPLACEMENT BEZEL Back Mount Rack Bezel MFG# SB39526P UPC# 731957165855
17 item(s)
+

$28.22 $23.99
BALL JOINT 30 SERIES 10/32 threads. with 1/4 - 28 stud MFG# 031126 UPC# 731957291455
170 item(s)
+

$71.99 $57.99
BALL JOINT 30 SERIES 10-32 MFG# 035242 UPC# 731957288806
1 item(s)
+

$43.52 $36.99
BALL JOINT 40 SERIES 1/4- 28 MFG# 032267 UPC# 731957252302
Out-of-stock

$31.75 $26.99
Install on Teleflex Morse helm using SSC72 cables to convert helm to accept SSC62 series QC cables. MFG# SA27620P UPC# 731957085351
107 item(s)
+

$52.93 $44.99
Teleflex Black Mechanical Steering Bezels - 20 Degree - 20 degree bezel fits the SH5150P, SH4910P, SH4920P, SH5094P and SH5180P helms20 degree bezel fits the following complete systems. HPS sterndrive steering system Safe-T QC sterndrive steering system NFB 4.2 outboard steering system. MFG# SB27483P UPC#...
74 item(s)
+

$37.99
Teleflex Black Mechanical Steering Bezels - 90 degree bezel kit fits the following complete systems, SS132, SS147, SS148, HPS sterndrive SB27484P 90 degree bezel fits the following complete system Safe-T QC. MFG# SB27484P UPC# 731957085610
36 item(s)
+

$31.75 $26.99
Replacement control knobs fit most controls with 3/8-24 threaded handles. MFG# 4009819 UPC# 131957016513
37 item(s)
+

$141.16 $119.99
BLEEDER FITTING MFG# HF5520 UPC# 731957802637
2 item(s)
+

$226.99 $196.99
NFB PRO RACK SINGLE CABLE TELEFLEX® NFB&#8482 RACK SINGLE CABLE MFG# SSC13418 UPC# 731957082787
40 item(s)
+

$404.59 $370.99
Assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead helping to eliminate excess loose hose kinking or chafing. Includes two hoses - can be used with all SeaStar systems EXCEPT BayStar Capilano and 3-line inboard. MFG#...
6 item(s)
+

$437.69 $400.99
Assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead helping to eliminate excess loose hose kinking or chafing. Includes two hoses - can be used with all SeaStar systems EXCEPT BayStar Capilano and 3-line inboard. MFG#...
1 item(s)
+

$230.89 $206.99
Assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead helping to eliminate excess loose hose kinking or chafing. Includes two hoses - can be used with all SeaStar systems EXCEPT BayStar Capilano and 3-line inboard. MFG#...
65 item(s)
+

$238.59 $220.99
Assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead helping to eliminate excess loose hose kinking or chafing. Includes two hoses - can be used with all SeaStar systems EXCEPT BayStar Capilano and 3-line inboard. MFG#...
10 item(s)
+

$53.39 $42.99
For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters. MFG# 212151003 UPC# 808282228941
18 item(s)
+

$50.58 $42.99
Cable Brake 30/40/60 Series MFG# 044386 UPC# 731957244383
37 item(s)
+

$23.52 $19.99
CABLE CLIP ASSY 30 SER MFG# 036174 UPC# 731957294845
159 item(s)
+

$67.69 $53.99
Ideal for single or dual station inboard I/O and O/B applications. Single function control - each lever controls throttle OR shift. Utilize 3300/33C or 4300/43C type cables. Adjustable throttle friction and shift detent feel. Optional neutral safety switch and clutch detent kit available. MFG# 061001 UPC#...
5 item(s)
+

$1,744.49 $1,534.99
A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels. MFG# HC5351...
Out-of-stock

$16.46 $13.99
     MFG# 042756 UPC# 731957268556
14 item(s)
+

$166.49 $131.99
Designed for smaller OB's. Low friction hydraulic steering system. 4.5 turns from lock-to-lock. Balanced cylinder, features compact design that fits most splashwells. Cylinder provides full engine movement.Compact helm has 5'' footprint & needs 3'' dash hole (standard or Tilt). Standard 3/4'' tapered steering...
25 item(s)
+

$73.39 $57.99
The bolts and clevis that you need to connect the steering cable to your engine. MFG# SA27314P UPC# 731957024428
3 item(s)
+

$43.52 $36.99
CLUTCH DETENT,S CONTROL MFG# 022328 UPC# 731957634191
7 item(s)
+

$45.59 $35.99
Original and replacement connection kits for throttle and shift control systems using 3300 and 3300 hp cable. Allows quick installation and maximum adjustment at engine For use with two 3300 cables Package includes throttle and shift adapters for one engine MFG# CA27321P UPC# 731957084736
2 item(s)
+

$173.09 $138.99
For 3300/33C style cables MFG# 304939 UPC# 731957280541
Out-of-stock

$783.39 $717.99
Product Replacement Part No. Description Part No. SEAL KITS HC5303 BA125-3ATM HS5176 HC5312 BA125-7ATM HS5151 HC5313 BA135-7ATM HS5161 HC5314 BA150-7ATM HS5161 HC5318 BA150-7TM HS5161 HC5319 BA175-7TM 225226 HC5326 BA150-7EM Stern 225320 Product Replacement Part No. Description Part No. HC5327 BA135-8EMV Stern...
3 item(s)
+

$78.81 $66.99
Cylinder seal kit for K18-K20 MFG# KS02 UPC# 731957874498
Out-of-stock

$63.79 $57.99
Cylinder seal kit for K6 MFG# KS19 UPC# 731957814641
Out-of-stock

$415.29 $380.99
Dual Cylinder Purge Hose used with Teleflex Power Purge JR. HA5445 The easy way to 100% purge air out of BayStar and SeaStar hydraulic steering systems. Reduces installation and warranty costs while enhancing the quality of the boat to the end user.   MFG# HA5461 UPC# 731957879868...
11 item(s)
+

$53.99 $42.99
Patented Self-Locking Throttle makes it the only control that stops cable creep in single or in series multi-station applications. No need for cable brakes or other friction devices. Single function control - each lever controls throttle OR shift. Can be user-configured as either Push or Pull to operate throttle...
9 item(s)
+

$42.34 $35.99
Used for Single and Twin S controls. MFG# 039489002 UPC# 731957609854
12 item(s)
+

$255.69 $219.99
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash...
18 item(s)
+

$124.39 $115.99
The new Dual Station (DS) unit is designed for inboard or sterndrive boaters that like using one lever to do both throttle and shift in their dual station boat. The Station Selector allows smooth operation of dual function controls in a dual station application. Great for dual station boats without a lot of dash...
Out-of-stock

$76.49 $68.99
Fitting Kit MFG# HF4202 UPC# 731957891808
6 item(s)
+

$133.79 $107.99
One kit is required for each additional station. Kit includes: 2 assemblies of connector fitting and nipple, 3/8 x 1/4 street elbow, washer, and nut Used in systems plumbed with nylon or copper tube MFG# HF5502 UPC# 731957802477
6 item(s)
+

$629.89 $576.99
SEASTAR ® FRONT MOUNT CYLINDER TIE BAR TYPE SYSTEM KICKER/TROLLING MOTOR ADAPTER KIT For HC5345 MFG# HO6010 UPC# 731957819123
4 item(s)
+

$41.16 $34.99
Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly. MFG# HA5438 UPC# 731957801074
519 item(s)
+

$263.52 $223.99
Designed exclusively for jet boats JBS features a choice of two steering arcs a real steering cable (not a control cable) plus an assortment of mounting options for virtually any boat. MFG# SH5088P UPC# 731957086891
12 item(s)
+

$70.39 $55.99
H20 Series helm seal kit w/external black seal MFG# HS01 UPC# 731957873026
1 item(s)
+

$70.39 $55.99
H20 Series helm seal kit w/internal seal and white visible wiper MFG# HS02 UPC# 731957873033
10 item(s)
+

$70.39 $55.99
H40 Series helm seal kit w/internal seal and white visible wiper MFG# HS04 UPC# 731957873057
Out-of-stock

$70.39 $55.99
Helm seal kit for H50 series MFG# HS05 UPC# 731957873064
Out-of-stock

$47.05 $39.99
SEASTAR CLOSING NUTS 3 MFG# HF5524
Out-of-stock

$39.99 $33.99
UNION COUPLING 3/8 INCH TUBE MFG# HF5527 UPC# 731957802699
21 item(s)
+

$47.05 $39.99
Conn Fitting (3) (3/8IN. Tube To 1/4IN. NPT Male) MFG# HF5528 UPC# 731957802705
20 item(s)
+

$48.22 $40.99
PRO STEERING KIT by TELEFLEX ® SERVICE ITEM High HP Tiller Bolt MFG# HA5822 UPC# 731957895301
2 item(s)
+

$230.79 $212.99
High-Performance back mount single-cable rack & pinion helm. Requires separate tilt mechanism SH91800P. MFG# SH91630P UPC# 731957165787
Out-of-stock

$181.69 $142.99
Kit - Changes HC4645 Into HC4648 MFG# HA4642 UPC# 731957891174
1 item(s)
+

$152.29 $121.99
Kit - Changes HC4645 Into HC4658 MFG# HA4643 UPC# 731957891181
Out-of-stock

$238.99 $175.99
The Mechanical Steering Connection Clamp Block, can be used as a standoff from the transom (outboards without tilt tubes) or on a stringer (inboard model) for the steering cable. 4 7/8" or 2 5/8" Stand Off Heavy Duty with white powder coated finish Constructed of corrorsion resistant materials. MFG# SA27149P...
1 item(s)
+

$214.99 $197.99
Universal Transom Mount Kit The Teleflex universal transom mounting kit can be used for most outboard motor steering applications. Bolts to the inside of your transom and provides an anchoring point for the steering cable. Kit includes: Teleflex Outboard Clamp Block Support Tube Clevis...
7 item(s)
+

$160.59 $126.99
  This link arm is designed to return to the motor-steering attachment point for through-the-tilt-tube mounting applications, which are common in modern outboards. MFG# SA27361P UPC# 731957084972
1 item(s)
+

$355.69 $255.99
MFG# HF5515 UPC# 731957802590
4 item(s)
+

$76.09 $60.99
All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. MFG# HF5531 UPC# 731957802736
9 item(s)
+

$42.34 $35.99
Brass. Heavy duty. Fits Teleflex Morse and other control cables with 10-32 ends. Kit contains 2 each of pivot end, bushing, cotter pin and washer. For use on CH440 or CH5600 controls. MFG# CA27563P UPC# 731957085665
19 item(s)
+

$45.89 $35.99
Are UNF threaded. Cable   4300 Stud     9/16" Thread             1/4-28 MFG# CA28014P UPC# 731957085290
12 item(s)
+

$176.29 $138.99
For single or twin outboards to 600 hp when using twin cylinders and 55 mph boat speed. MFG# HP6003 UPC# 731957900173
44 item(s)
+

$52.93 $44.99
All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. MFG# HF5548 UPC# 731957834973
7 item(s)
+

$240.69 $174.99
All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. MFG# HF5519 UPC# 731957802620
1 item(s)
+

$172.59 $162.99
MFG# HF5513 UPC# 731957802576
2 item(s)
+

$179.99 $152.99
MFG# HF5512 UPC# 731957802569
7 item(s)
+

$29.40 $24.99
A unique wiper seal that slips over the cable output ram and snaps onto the tilt tube nut. Dirt and corrosion are wiped out while essential lubrication is sealed in the engine tilt tube. Adds years of service to a steering cable. MFG# SA39329P UPC# 731957085245
17 item(s)
+

$44.69 $37.99
For single or twin outboards to 600 hp when using twin cylinders and 55 mph boat speed. MFG# HP6001 UPC# 731957900166
18 item(s)
+

$193.49 $152.99
MFG# SA27579P UPC# 731957084361
Out-of-stock

$62.89 $49.99
MFG# SA27329P UPC# 731957083753
8 item(s)
+

$19.99 $16.99
MFG# 37664 UPC# 731957257352
Out-of-stock

$139.99 $118.99
Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with copper tubing to accommodate slight cylinder movement. MFG# HA5731 UPC# 731957801258
Out-of-stock

$51.75 $43.99
All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. MFG# HF5534 UPC# 731957802767
23 item(s)
+

$54.11 $45.99
All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. MFG# HF5538 UPC# 731957802804
3 item(s)
+

$124.99 $98.99
Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube. MFG# HA5450 UPC# 731957801166
3 item(s)
+

$61.69 $49.99
MFG# HP6004 UPC# 731957900180
3 item(s)
+

$55.59 $43.99
MFG# HP6005 UPC# 731957900197
Out-of-stock

$45.87 $38.99
The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and BayStar front mounting outboard cylinders. MFG# HA5477 UPC# 731957900913
24 item(s)
+

$423.99 $391.99
MFG# SA27255 UPC# 731957083944
6 item(s)
+

$569.39 $505.99
The SeaStar cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar as opposed to a solid link or a mechanical tie bar. Hydraulic tie bar SeaStar alignment valve may be used in conjunction with a cylinder mounted to each engine....
26 item(s)
+