Shop our Catalog Store in East Ridge, TN

Categories

Dock Accessories

← Prev
1 2 3
Next →
Sort by Alphabetical: Z to A
24 Per Page
  • Save 15%
Tie Down Washer Plate - 1-1/2"L X 5"H 24284
$8.22 $6.99
DOCK SYSTEM Washer Plate - Use 2 washer plates w/each angle. 1-1/2"L X 5"H. Part # 24284. MFG# 24284 UPC# 081628242843
70 item(s)
+ −
  • Save 15%
Tie Down T-Connector (Male) - 5"L X 5"H 26532
$41.16 $34.99
DOCK SYSTEM Male T-Connector - One welded 1/2" tab. Use w/female t-connector to attach fingers & ramps. Measures 5"L X 5"H. 3/4" bolt set (N) reuired for joint. Part # 26532. MFG# 26532 UPC# 081628265323
97 item(s)
+ −
  • Save 15%
Tie Down T-Connector (Female) - 5"L X 5"H 26528
$52.93 $44.99
DOCK SYSTEM Female T-Connector - Two welded 1/2" tabs. Bolts to side of dock to attach fingers & ramps 5"L X 5"H. Part # 26528. MFG# 26528 UPC# 081628265286
29 item(s)
+ −
  • Save 22%
Tie Down Pipe Holder/Outside - 3" 24280
$63.79 $49.99
DOCK SYSTEM Pipe Holder/Outside 3" - Bolts to outside of dock. Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. Part # 24280 MFG# 24280 UPC# 081628242805
26 item(s)
+ −
  • Save 15%
Tie Down Lag Bolt Set 24287
$18.81 $15.99
DOCK SYSTEM LAG BOLT SET Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Part # 24287. MFG# 24287 UPC# 081628242874
49 item(s)
+ −
  • Save 15%
Tie Down Engineering Washer Plate Iniin 26409
$7.05 $5.99
I. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H. MFG# 26409 UPC# 081628264098
402 item(s)
+ −
  • Save 11%
TIE DOWN ENGINEERING Tie Down Engineering Dock Side Cross Beam Extension 86934
$39.19 $34.99
With the addition of the Cross Beam 28" Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide. MFG# 86934 UPC# 081628869347
1 item(s)
+ −
  • Save 10%
TIE DOWN ENGINEERING Tie Down Engineering Dock Side Cross Beam Extension 86916
$41.29 $36.99
With the addition of the Cross Beam 28" Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide. MFG# 86916 UPC# 081628869163
8 item(s)
+ −
  • Save 23%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Outside Corner End 26428
$70.49 $53.99
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26428 UPC# 081628264289
9 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Male T Connector 5L x 5H 26427
$54.11 $45.99
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26427 UPC# 081628264272
12 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Inside Corner 8-1/4L x 5H 2...
$68.22 $57.99
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26417 UPC# 081628264173
138 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Inside Corner 8-1/4L x 5H 2...
$61.16 $51.99
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26401 UPC# 081628264012
44 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Inside Corner 10-1/2L x 5H ...
$75.28 $63.99
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26424 UPC# 081628264241
22 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoo...
$65.87 $55.99
Commercial Grade w/4" radius for 8" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 14" x 3" For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26429 UPC# 081628264296
51 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Str...
$21.16 $17.99
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26369 UPC# 081628263695
24 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26422
$14.11 $11.99
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26422 UPC# 081628264227
35 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26399
$14.11 $11.99
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26399 UPC# 081628263992
249 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26398
$24.69 $20.99
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26398 UPC# 081628263985
193 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26397
$39.99 $33.99
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26397 UPC# 081628263978
9 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26392
$14.11 $11.99
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26392 UPC# 081628263923
56 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26380
$34.11 $28.99
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26380 UPC# 081628263800
53 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26379
$41.16 $34.99
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26379 UPC# 081628263794
15 item(s)
+ −
  • Save 23%
Tie Down Engineering Roller Only 26414
$130.39 $100.99
Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. CANNOT BE SOLD IN CALIFORNIA MFG# 26414 UPC# 081628264142
25 item(s)
+ −
  • Save 22%
Tie Down Engineering Pipe Holder Inkin 26411
$65.59 $50.99
K. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set ?M? required for attaching. MFG# 26411 UPC# 081628264111
43 item(s)
+ −
← Prev
1 2 3
Next →

Product filters

Price
 –   $
  • 5
  • 82
  • 158
  • 235
  • 311
Manufacturer
Advanced

Help

Have any questions on our products?  Feel free to contact us.