Dock Accessories

$52.93 $44.99
Stainless steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles. Bag of 100. MFG# 1006-F 1006F UPC# 776113100608
200 item(s)
+

$16.46 $13.99
DOCK SYSTEM Back Up Plates - Hardware designed for use with 1-1/2" thick lumber; minimum width 6:. Hardware is mounted with 3/8" carriage bolts (M). All male & female dock - to - dock connections are made with either 3/4" bolts with lock nut (N) or 3/4" connecting pins (O). Tie Downs' Wood Dock Plan Kit will...
134 item(s)
+

$21.16 $17.99
DOCK SYSTEM Connector Pin Set - For quick disconnect. Used to connect male & female connectors. Galvanized 3/4" connector pin & hitch clip pin. Part No. 26531 MFG# 26531 UPC# 081628265316
31 item(s)
+

$17.64 $14.99
F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. MFG# 26406 UPC# 081628264067
2 item(s)
+

$62.49 $43.99
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H. MFG# 26529 UPC# 081628265293
22 item(s)
+

$78.99 $55.99
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H. MFG# 26410 UPC# 081628264104
76 item(s)
+

$441.59 $284.99
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16". For more dock hardware information including building guides, go to www.tiedown.com/adock.html CANNOT BE SOLD IN CALIFORNIA. MFG# 26434 UPC#...
10 item(s)
+

$56.39 $39.99
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3". For more dock hardware information including building guides, go to www.tiedown.com/adock.html . CANNOT BE SOLD IN CALIFORNIA. MFG# 26391 UPC#...
21 item(s)
+

$72.99 $50.99
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26418 UPC# 081628264180
36 item(s)
+

$32.09 $30.99
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". MFG# 26535 UPC# 081628265354
124 item(s)
+

$16.46 $13.99
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". CANNOT BE SOLD IN CALIFORNIA MFG# 26534 UPC# 081628265347
91 item(s)
+

$66.19 $46.99
N. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" X 3-1/2". MFG# 24279 UPC# 081628242799
17 item(s)
+

$19.99 $16.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24289 UPC# 081628242898
84 item(s)
+

$27.05 $22.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24292 UPC# 081628242928
69 item(s)
+

$49.09 $46.99
G. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H. MFG# 26407 UPC# 081628264074
56 item(s)
+

$143.39 $101.99
Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. CANNOT BE SHIPPED TO CALIFORNIA MFG# 26416 UPC# 10081628264163
19 item(s)
+

$54.79 $51.99
D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit and is 8-1/4"L x 5"H. MFG# 26403 UPC# 081628264036
102 item(s)
+

$47.99 $45.99
C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H. MFG# 26402 UPC# 081628264029
30 item(s)
+

$78.99 $55.99
A. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H. MFG# 26400 UPC# 081628264005
10 item(s)
+

$185.19 $130.99
R & S. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate. Commercial grade. MFG# 26412 UPC# 081628264128
2 item(s)
+

$363.29 $234.99
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement. MFG# 26423 UPC# 081628264234
28 item(s)
+

$411.99 $270.99
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (# 26412) and roller assembly (# 26414) to make up for the up and down movement. For pilings up to 12" in diameter. CANNOT BE SOLD IN CALIFORNIA. MFG# 26415 UPC# 081628264159
2 item(s)
+

$118.29 $83.99
E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching. MFG# 26404 UPC# 081628264043
14 item(s)
+

$35.69 $34.99
H. One welded 1/2" tab. Use with Female T connector to attach fingers and ramps. 5"L x 5"H. Bolt set "N" required for joint. MFG# 26408 UPC# 081628264081
71 item(s)
+

Product filters

Price
 –   $
  • 5
  • 75
  • 145
  • 215
  • 285

Help

Have any questions on our products?  Feel free to contact us.