Shop our Catalog Store in East Ridge, TN

Categories

Dock Accessories

← Prev
1 2 3
Next →
Sort by Price: Low to High
24 Per Page
  • Save 15%
Tie Down Engineering Washer Plate Iniin 26409
$7.05 $5.99
I. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H. MFG# 26409 UPC# 081628264098
370 item(s)
+ −
  • Save 15%
Tie Down Washer Plate - 1-1/2"L X 5"H 24284
$8.22 $6.99
DOCK SYSTEM Washer Plate - Use 2 washer plates w/each angle. 1-1/2"L X 5"H. Part # 24284. MFG# 24284 UPC# 081628242843
70 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26399
$14.11 $11.99
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26399 UPC# 081628263992
243 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26392
$14.11 $11.99
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26392 UPC# 081628263923
56 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26422
$14.11 $11.99
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26422 UPC# 081628264227
35 item(s)
+ −
  • Save 15%
Tie Down Angle - 2-1/2"L X 5"H 26527
$15.28 $12.99
DOCK SYSTEM Angle-Use for all cross supports. 2-1/2"Lx5"H. Part # 26527 CANNOT BE SOLD IN CALIFORNIA MFG# 26527 UPC# 081628265279
153 item(s)
+ −
  • Save 15%
Tie Down Back Up Plates 26413
$17.64 $14.99
DOCK SYSTEM Back Up Plates - Hardware designed for use with 1-1/2" thick lumber; minimum width 6:. Hardware is mounted with 3/8" carriage bolts (M). All male & female dock - to - dock connections are made with either 3/4" bolts with lock nut (N) or 3/4" connecting pins (O). Tie Downs' Wood Dock Plan Kit will...
39 item(s)
+ −
  • Save 15%
Tie Down Lag Bolt Set 24287
$18.81 $15.99
DOCK SYSTEM LAG BOLT SET Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Part # 24287. MFG# 24287 UPC# 081628242874
49 item(s)
+ −
  • Save 15%
Tie Down Engineering Angle 2-1/2 L x 5 H 26406
$18.81 $15.99
F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. MFG# 26406 UPC# 081628264067
244 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hdw Lag Bolt 3/8X3 8/Bag 24289
$21.16 $17.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24289 UPC# 081628242898
37 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Str...
$21.16 $17.99
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26369 UPC# 081628263695
24 item(s)
+ −
  • Save 15%
Tie Down Connector Pin Set - 3/4" 26531
$23.52 $19.99
DOCK SYSTEM Connector Pin Set - For quick disconnect. Used to connect male & female connectors. Galvanized 3/4" connector pin & hitch clip pin. Part No. 26531 MFG# 26531 UPC# 081628265316
188 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hardware M Carriage Bolt Set 8/Bag 26534
$23.52 $19.99
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". CANNOT BE SOLD IN CALIFORNIA MFG# 26534 UPC# 081628265347
81 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26398
$24.69 $20.99
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26398 UPC# 081628263985
193 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hdw Lag Bolt 3/8X5 8/Bag 24292
$29.40 $24.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24292 UPC# 081628242928
62 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26380
$34.11 $28.99
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26380 UPC# 081628263800
50 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26397
$39.99 $33.99
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26397 UPC# 081628263978
9 item(s)
+ −
  • Save 15%
Tie Down T-Connector (Male) - 5"L X 5"H 26532
$41.16 $34.99
DOCK SYSTEM Male T-Connector - One welded 1/2" tab. Use w/female t-connector to attach fingers & ramps. Measures 5"L X 5"H. 3/4" bolt set (N) reuired for joint. Part # 26532. MFG# 26532 UPC# 081628265323
97 item(s)
+ −
  • Save 11%
TIE DOWN ENGINEERING Tie Down Engineering Dock Side Cross Beam Extension 86934
$39.19 $34.99
With the addition of the Cross Beam 28" Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide. MFG# 86934 UPC# 081628869347
1 item(s)
+ −
  • Save 15%
TIE DOWN ENGINEERING Tie Down Engineering Dock Hardware - Angle Brackets/Clip 26379
$41.16 $34.99
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26379 UPC# 081628263794
15 item(s)
+ −
  • Save 15%
Dock Edge Mounting Screws 1006-F
$42.34 $35.99
Stainless steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles. Bag of 100. MFG# 1006-F 1006F UPC# 776113100608
99 item(s)
+ −
  • Save 10%
TIE DOWN ENGINEERING Tie Down Engineering Dock Side Cross Beam Extension 86916
$41.29 $36.99
With the addition of the Cross Beam 28" Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide. MFG# 86916 UPC# 081628869163
8 item(s)
+ −
  • Save 15%
Tie Down Engineering Male T Connector Inhin 26408
$44.69 $37.99
H. One welded 1/2" tab. Use with Female T connector to attach fingers and ramps. 5"L x 5"H. Bolt set "N" required for joint. MFG# 26408 UPC# 081628264081
146 item(s)
+ −
  • Save 24%
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop Commercial Grade 26391
$56.39 $42.99
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3". For more dock hardware information including building guides, go to www.tiedown.com/adock.html . CANNOT BE SOLD IN CALIFORNIA. MFG# 26391 UPC#...
17 item(s)
+ −
← Prev
1 2 3
Next →

Product filters

Price
 –   $
  • 5
  • 82
  • 158
  • 235
  • 311
Manufacturer
Advanced

Help

Have any questions on our products?  Feel free to contact us.