Shop our Catalog Store in East Ridge, TN

Categories

Bilge Blowers

Sort by Alphabetical: A to Z
24 Per Page
  • Save 15%
Attwood Turbo 4000 Quiet Blower 12 Volt 4" - White 1747-4
$55.28 $46.99
ATTWOOD® TURBO 4000 SERIES II IN-LINE BLOWER - STANDARD Utilizing advanced fan blade design techniques, Attwood developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. 12V.   MFG# 1747-4 17474 UPC# 022697174741
14 item(s)
+ −
  • Save 15%
Attwood Water Resistant Blower 3" 1733-4
$51.75 $43.99
Maximum efficiency. Nickel-plated motor can. Polymer motor cap seals wires & motor for better water-resistance. Tabs on intake & exhaust hold ventilation hose/clamp firmly in place. 16-ga. tinned & caulked wires. Stiffening ribs reduce housing distortion. Low amp draw motor for longer blower &...
465 item(s)
+ −
  • Save 14%
Attwood Water Resistant Blower 4" 12v - 1749-4
$53.39 $45.99
The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly...
266 item(s)
+ −
  • Save 15%
Detmar 3" Blower Tunnel 7-5-4C
$44.69 $37.99
High capacity CFM at low amp draw. 5-blade, bullet-nosed impeller & cambered stator vanes provide high pressure with minimum air turbulence. Molded of tough, corrosion-proof ABS plastic with rugged built-in mounting brackets. Molded tabs on all hose flanges provide positive hose connections. Meets or exceeds UL...
93 item(s)
+ −
  • Save 15%
Detmar 4" Blower Tunnel 7-5-1C
$43.52 $36.99
High capacity CFM at low amp draw. 5-blade, bullet-nosed impeller & cambered stator vanes provide high pressure with minimum air turbulence. Molded of tough, corrosion-proof ABS plastic with rugged built-in mounting brackets. Molded tabs on all hose flanges provide positive hose connections. Meets or exceeds UL...
125 item(s)
+ −
  • Save 15%
ITT Jabsco 12 Volt/3" Port Flangemount Marine Blower 35115-0020
$161.16 $136.99
Designed to remove gasoline vapors form enclosures containing gasoline engines. Efficient, high-volume evacuation of vapors on vessels with gasoline-powered engines. When properly installed & used, meets requirements of USCG regulation Title 46, Chapter I, Part 183 Subpart K for marine ventilation. FLANGEMOUNT:...
24 item(s)
+ −
  • Save 13%
ITT Jabsco Flex Mount Marine Blower 35440-0000
$284.19 $245.99
4'' ports. Air Flow: 250 CFM. Amps: 12. Fuse: 15. In-4"/Out-4". Size: 9-5/8"Hx9-1/4"Wx8-3/4"L. MFG# 35440-0000 354400000 UPC# 671880030250
32 item(s)
+ −
  • Save 9%
ITT Jabsco Flex Mount Marine Blower 35515-0010
$173.29 $157.99
3'' ports. Air Flow: 105 CFM. Amps: 4.3. Fuse: 6. In-3"/Out-3". Size: 5-1/2"Hx5"Wx6-3/4"L. MFG# 35515-0010 355150010 UPC# 671880030526
18 item(s)
+ −
  • Save 15%
ITT Jabsco Par 12V 3 Blower Flexmount 367400000
$276.46 $234.99
Offers safe efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46 Chapter I part 183 subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys...
3 item(s)
+ −
  • Save 4%
Johnson Pump AirV Radial Blower 4 804741701
$214.49 $205.99
Extra heavy duty marine radial blower is designed for engine compartment ventilation prior to startup. Made for continuous duty and is therefore suitable for air intake or extraction in bilges galleys accommodation and other compartments. Flange Mount design with double ball bearing motor high-impact anti-shock ABS...
21 item(s)
+ −
  • Save 18%
Johnson Pump Blower-Remote Mount F/3 Hose 54154
$115.19 $94.99
Radial flow design. Produces a substantial output at relatively low RPM's. Low noise level make excellent for use in heads & galleys. Massive 3" diameter motor idles at 3100 RPM's assuring long life. Housings are molded of tough glass filled composite resin. Flange Mount # 54124 - Conventional design outlet flange...
20 item(s)
+ −
  • Save 15%
Johnson Pump In-Line Blower 3 66302
$75.28 $63.99
High efficiency blower High capacity at low amp draw Constructed of ABS plastic Meets & exceeds: ABYC H-2 NMMA Type Accepted U.S.C.G. 33 CFR sections 183.410 183.425 & 183.610 1 Year Warranty MFG# 66302 UPC# 729321917568
46 item(s)
+ −
  • Save 15%
Johnson Pump In-Line Blower 4 66402
$65.87 $55.99
High efficiency blower High capacity at low amp draw Constructed of ABS plastic Meets & exceeds: ABYC H-2 NMMA Type Accepted U.S.C.G. 33 CFR sections 183.410 183.425 & 183.610 1 Year Warranty MFG# 66402 UPC# 729321917582
56 item(s)
+ −
  • Save 4%
Rule Industries 3" In line Bilge Blower 140
$53.99 $51.99
Efficient high-volume air flow. Quiet operation. Low amp draw. Slip-on inlet & outlet ducting connections. Sealed motor shaft for moisture protection. Corrosion-resistant motor housing. ABYC-H2 , ISO 9097, IMCI (CE), NMMA type accepted. USCG 193.410 Compliant, ignition protected. 12-Volt. MFG# 140 UPC#...
117 item(s)
+ −
  • Save 15%
Rule Industries 4 In. Bilge Blower 240-24V
$89.40 $75.99
4 in. Bilge Blower 24 volt DC operation Provides ventilation for bilges, engine compartments, galleys and heads Designed for high output operation with low amp draw Corrosion resistant motor housing Ignition protected MFG# 240-24V 24024V
41 item(s)
+ −
  • Save 13%
Rule Industries Bilge Blower-4 Inline 240
$64.69 $55.99
Efficient high-volume air flow. Quiet operation. Low amp draw. Slip-on inlet & outlet ducting connections. Sealed motor shaft for moisture protection. Corrosion-resistant motor housing. ABYC-H2 , ISO 9097, IMCI (CE), NMMA type accepted. USCG 193.410 Compliant, ignition protected. 12-Volt. MFG# 240 UPC#...
218 item(s)
+ −
  • Save 15%
Seachoice In-Line Bilge Blower3 41871
$51.75 $43.99
Spark proof. Blower meets or exceeds the following standards: ABYCH H-2, USCG 33 CFR Sections 183.410 and 183.425, ISO 8846 and 909, SAE J1171. Housing is molded, tough corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose...
570 item(s)
+ −
  • Save 15%
Seachoice In-Line Bilge Blower4 41861
$54.11 $45.99
Spark proof. Blower meets or exceeds the following standards: ABYCH H-2, USCG 33 CFR Sections 183.410 and 183.425, ISO 8846 and 909, SAE J1171. Housing is molded, tough corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose...
336 item(s)
+ −

Product filters

Help

Have any questions on our products?  Feel free to contact us.