Solvents & Thinners

$74.19 $54.99
VOC-compliant (70%) solvent-based liquid specialty adhesive remover is designed to remove reactive adhesives from a variety of substrates. Reactive adhesives include adhesives that require a hardener or catalyst in order for the bond to occur such as expoxies urethanes and silicones. MFG# 38984 UPC# 051135089842...
1514 item(s)
+

$44.69 $37.99
Easily and safely removes varnish from teak, mahogany, and other fine woods. Will not damage wood's surface or surrounding fiberglass, while easily lifting multiple layers of paint, varnish or other wood coatings. Applied by brush or roller - Strip Away's smooth paste/gel consistency will effectively...
2 item(s)
+

$88.49 $56.99
T0008 - Use to wipe down final primed or topcoated surfaces before and after sanding. T0115 - Use to remove wax residue and grease from substrates. Do not use on freshly painted surfaces. T0170 - Slow evaporating use to wipe down finish primers and topcoats. MFG# T0170G UPC# 841006068799
251 item(s)
+

$41.29 $36.99
General purpose cleaner for polyester resin and gel coat. Not a thinner! Highly flammable!   MFG# 701890 UPC# 872687000662
18 item(s)
+

$57.09 $54.99
Reducer for polyester resins and gel coats. MFG# 701930 UPC# 872687000709
37 item(s)
+

$178.79 $115.99
MFG# 077006/1EAAL 0770061EAAL UPC# 841006000348
Out-of-stock

$205.59 $115.99
MFG# 077007/1EAAL 0770071EAAL UPC# 841006000355
1 item(s)
+

$28.99
Removes dried paint shellacs varnishes and lacquer from natural and nylon brushes. Water rinsable. Contains lanolin. Not used for synthetic brushes other than nylon. Does not contain methanol alcohol. MFG# 050804 UPC# 082069292046
15 item(s)
+

$22.19 $21.99
Denatured alcohol clean air solvent and alcohol stove fuel. Thins shellac stain sealers or spirit varnishes. Fuel for marine alcohol stoves. Burns with nearly invisible smokeless flame. One Quart MFG# 103004 UPC# 082069640045
117 item(s)
+

$20.79 $19.99
Item cannot ship overseas Clean air solvent thins lacquers for all types of application. Cleans tools brushes sprayers rollers applicators conditions and prepares surface. Picture is a gallon this is a quart. MFG# 104004 UPC# 082069650044
100 item(s)
+

$663.09 $510.99
Removes many types of marine paints and varnishes including copper based antifoulings enamels teak oil finish urethanes rubber based deck paints latex lacquers etc. Will not damage gel coat or fiberglass and safe on all wood surfaces. Environmentally safe nonflammable low odor and has no harsh solvents. MFG#...
Out-of-stock

$191.39 $142.99
Removes many types of marine paints and varnishes including copper based antifoulings, enamels, teak oil finish, urethanes, rubber based deck paints, latex, lacquers, etc. Will not damage gel coat or fiberglass and safe on all wood surfaces. Environmentally safe, biodegradable, non-flammable, low odor and has no...
14 item(s)
+

$58.19 $49.99
Designed for use in Cukote Tropikote Biocop and Sharkskin when temperatures are above 85°F. This will cause paint to dry slower in high heat. Never thin paint more than 10%. MFG# 2035GL UPC# 811577012989
11 item(s)
+

$37.64 $31.99
Designed for use in Cukote Tropikote Biocop and Sharkskin when temperatures are above 85°F. This will cause paint to dry slower in high heat. Never thin paint more than 10%. MFG# 2035QT UPC# 811577013016
26 item(s)
+

$59.49 $49.99
Designed for hot climates. Islands 44 Reducer should be the only reducer used in Islands 44 Plus. Never thin paint more than 10%. MFG# 2031GL UPC# 811577012958
7 item(s)
+

$31.75 $26.99
Designed for hot climates. Islands 44 Reducer should be the only reducer used in Islands 44 Plus. Never thin paint more than 10%. MFG# 2031QT UPC# 811577012965
16 item(s)
+

$60.69 $50.99
When temperature is below 85° 2033 is designed to flash quicker. This product can be used in Cukote Tropikote Biocop and Sharkskin. Never thin paint more than 10%. MFG# 2033GL UPC# 811577012972
19 item(s)
+

$36.46 $30.99
When temperature is below 85° 2033 is designed to flash quicker. This product can be used in Cukote Tropikote Biocop and Sharkskin. Never thin paint more than 10%. MFG# 2033QT UPC# 811577013009
55 item(s)
+

$94.09 $73.99
This water-based low VOC wax etch and cleaner is a concentrated formula which provides deep penetrating and lifting action for removal of tough surface contaminants. Penetrating action is effective on wax oil residues surface soiling contaminants and mold spores. Eliminates the need for sanding. MFG# S90GL UPC#...
22 item(s)
+

$61.39 $46.99
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths wet one cloth with S-80. Wipe S-80 on with one hand in areas to be...
45 item(s)
+

$30.58 $25.99
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths wet one cloth with S-80. Wipe S-80 on with one hand in areas to be...
66 item(s)
+

$25.79 $22.99
Clean air multi-purpose low odor mineral spirit. Thins exterior/interior paint flats enamels and varnishes. Wipes fresh paint from painting tools buckets and pans. Removes wax grease soot and dust. Meets rule 66 environmental standards. MFG# 100014 UPC# 082069600148
126 item(s)
+

Help

Have any questions on our products?  Feel free to contact us.