Epoxy & Fiberglass

$1,347.05 $1,144.99
15 oz. non-woven E glass fabric. Two layers, 45 fiber orientation. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet-out. 73820 : The same as 737 fabric with a .75 oz./sq. ft. mat backing MFG# 738-20 73820 UPC# 811343011871
3 item(s)
+

$1,091.75 $927.99
15 oz. non-woven E glass fabric. Two layers, 45 fiber orientation. For composites, repairs and reinforcing. Achieves high fiber-to-resin ratio with hand wet-out. 73820 : The same as 737 fabric with a .75 oz./sq. ft. mat backing MFG# 73720 UPC# 811343011864
1 item(s)
+

$976.46 $829.99
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color. MFG# 407-B 407B UPC# 811343011581
14 item(s)
+

$681.16 $578.99
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump...
1 item(s)
+

$663.52 $563.99
A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. Very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to...
15 item(s)
+

$654.11 $555.99
A toughened versatile liquid epoxy for permanent waterproof bonding of fiberglass ceramics metals plastics damp and difficult-to-bond woods. With a modulus of elasticity of 150000 PSI it is a bit more flexible than standard epoxies and polyester but much stiffer than adhesive sealants. Makes structural bonds that...
12 item(s)
+

$627.05 $532.99
A toughened versatile liquid epoxy for permanent waterproof bonding of fiberglass ceramics metals plastics damp and difficult-to-bond woods. With a modulus of elasticity of 150000 PSI it is a bit more flexible than standard epoxies and polyester but much stiffer than adhesive sealants. Makes structural bonds that...
27 item(s)
+

$574.11 $487.99
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
1 item(s)
+

$569.40 $483.99
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
Out-of-stock

$541.16 $459.99
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than #407 low-density filler or micro balloons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color. MFG#...
21 item(s)
+

$467.05 $396.99
A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator 1/4" I.D. Vacuum Tubing (10') Vacuum Gauge (1) Junction "T" barbs (2) Release Fabric (15 sq. ft.) Breather Fabric (15 sq. ft.) Vacuum Bag Film (15 sq. ft.) Vacuum Bag Sealant (25') Complete kit...
5 item(s)
+

$434.11 $368.99
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color. MFG#...
23 item(s)
+

$571.79 $363.99
A two-component vinyl-ester filler formulated with short strand fiberglass for blister and other semistructural repairs. This high performance reinforced filler is designed to reduce water transmission and absorption into repaired areas, reducing the possibility of future osmotic blister damage. Hardener included....
51 item(s)
+

$404.69 $343.99
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color. MFG# 404-B 404B UPC# 811343011437
1 item(s)
+

$466.79 $313.99
ITEM CAN ONLY SHIP VIA GROUND! A two-component vinyl-ester filler designed for marine filling and fairing applications above and below the waterline. Resists water absorption into hulls, decks, and other fiberglass parts. Hardener included. MFG# 46006 UPC# 051131460065
153 item(s)
+

$480.89 $305.99
A polyester paste to permanently repair original high-gloss gel coat finish. Conceals gouges chips scrapes and deep scratches in fiberglass gel coat. Non-run non-sag formulation for rigid flexible polyester resins to produce resiliency and toughness. Use resin colorant to tint to desired color. When added to...
6 item(s)
+

$328.22 $278.99
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
6 item(s)
+

$287.05 $243.99
Produces rapid cure. Use with 105 resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with #300 pumps. MFG# 205-C 205C UPC# 811343010584
177 item(s)
+

$287.05 $243.99
Woven glass fabrics are ideal for building composite laminates and repairing fiberglass structures. May also be used to provide an abarasion-resistant covering for wooden structures. When wet-out, the 4 oz. and 6 oz. fabrics become transparent, allowing a clear, natural wood finish. May be painted or varnished....
7 item(s)
+

$250.58 $212.99
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves...
6 item(s)
+

$325.59 $205.99
Sprayable Fairing Compound is an epoxy surfacer used on large fairing surfaces as a surfacer before High Build Primer or Ultra Build Primer. For above waterline use only. MFG# D6001G UPC# 841006053344
26 item(s)
+

$340.19 $205.99
Sprayable Fairing Compound is an epoxy surfacer used on large fairing surfaces as a surfacer before High Build Primer or Ultra Build Primer. For above waterline use only. MFG# D3011G UPC# 841006053283
35 item(s)
+

$302.69 $190.99
Professional Use Only Premium trowelable product is a 2-part component epoxy used for fairing leveling or smoothing surface imperfections due to gouges pitting dents or weld seams. Super smooth finish and easy sanding. Fast cure time is 7 hours to the touch 7 days for full cure Standard cure time 24 hours to the...
28 item(s)
+

$296.49 $185.99
Professional Use Only Premium trowelable product is a 2-part component epoxy used for fairing leveling or smoothing surface imperfections due to gouges pitting dents or weld seams. Super smooth finish and easy sanding. Fast cure time is 7 hours to the touch 7 days for full cure Standard cure time 24 hours to the...
22 item(s)
+

Help

Have any questions on our products?  Feel free to contact us.