GROSS MECHANICAL LABS (GROCO)

$34.11 $28.99
Fuel system valves must have an independent means of support. These full-flow valves meet all requirements and feature a SS handle and hardware, PTFE seats and seals and is UL Listed for fuel applications. MFG# FV-250 FV250 UPC# 742985142176
59 item(s)
+

$589.00 $468.99
Bronze body, powerful and positive pressure. Ideal for oil change or fuel transfer, self-priming. Ports 3/8" NPT. MFG# GPB1 UPC# 742985142213
1 item(s)
+

$842.00 $652.99
Bronze body, powerful and positive pressure. Ideal for oil change or fuel transfer, self-priming. Ports 3/8" NPT. MFG# GPBR1 UPC# 742985142220
6 item(s)
+

$29.40 $24.99
Provides low pressure, low profile flow into plumbing system. Includes locknut. MFG# HSTH-750-W HSTH750W UPC# 742985141728
134 item(s)
+

$1,291.00 $973.99
At the heart of the U-Lube system is a powerful gear pump. All models have dry-run protection, touchpad control, a plumbing schematic to tell you what hose goes where, and a handy maintenance log. MFG# G-3 12V G312V UPC# 742985144934
4 item(s)
+

$137.00 $117.99
AS-100 uses the simple and reliable pressure fluctuation from a rising or falling bilge water level to turn your bilge pump on and off automatically. No floats to stick or fill with water. Approximate levels are on at 2-3/4" of bilge level and off at 1". Use with a pump that draws up to 10-amps running continuously...
2 item(s)
+

$239.00 $188.99
For the discontinued K toilet. Contains bowl gasket, gasket and spring assemblies, check ball, gaskets, seals and joker valve. MFG# K UPC# 742985006515
20 item(s)
+

$79.00 $68.99
Bronze. With mounting ring. Easy access to the thru-hull fitting and seacock beneath Groco hull strainer with patented access door design. No need to remove the entire strainer to clear nuisance marine growth. MFG# RSC-1000 RSC1000 UPC# 742985073722
31 item(s)
+

$62.00 $54.99
Bronze MFG# SC-1500-L SC1500L UPC# 742985122666
60 item(s)
+

$1,351.00 $1,032.99
Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves,...
17 item(s)
+

$2,107.00 $1,563.99
Features patented field-selectable and changeable direction of rotation-permits installation in otherwise unusable locations. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Handle has a square hole that accepts standard ratchet-helps to reach hard-to-reach valves,...
12 item(s)
+

$35.28 $29.99
Service kits for ARG strainers. Contain cap O-ring, sight glass O-ring, washer and drain wingnut gasket. MFG# ARG1 UPC# 742985010413
205 item(s)
+

$38.81 $32.99
Service kits for ARG strainers. Contain cap O-ring, sight glass O-ring, washer and drain wingnut gasket. MFG# ARG2 UPC# 742985010505
149 item(s)
+

$86.00 $74.99
TPC series Tail Pieces are threaded with NPS (Straight) female pipe thread, and are for use with GROCO SV series Seacocks or with any product with straight male pipe thread. The use of TPC series Tail Pieces on products with NPT (tapered) pipe thread is recommended only for low pressure application, and then only...
31 item(s)
+

$69.00 $64.99
TPC series Tail Pieces are threaded with NPS (Straight) female pipe thread, and are for use with GROCO SV series Seacocks or with any product with straight male pipe thread. The use of TPC series Tail Pieces on products with NPT (tapered) pipe thread is recommended only for low pressure application, and then...
20 item(s)
+

$58.00 $50.99
TP Tail Pieces are threaded with NPS (Straight) female pipe thread, and are for use with GROCO SV series Seacocks or with any product with straight male pipe thread. The use of TP series Tail Pieces on products with NPT (tapered) pipe thread is recommended only for low pressure application, and then only with a...
58 item(s)
+

$54.00 $47.99
TP Tail Pieces are threaded with NPS (Straight) female pipe thread, and are for use with GROCO SV series Seacocks or with any product with straight male pipe thread. The use of TP series Tail Pieces on products with NPT (tapered) pipe thread is recommended only for low pressure application, and then only with a...
27 item(s)
+

$299.00 $238.99
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. MFG# TH-3000-W TH3000W UPC# 742985064164 MFG# TH-3000-W...
43 item(s)
+

$23.00 $21.99
Has locknut with bonding screw. Comes with nut. Bronze. MFG# FTH750W UPC# 742985002609
49 item(s)
+

$84.00 $73.99
Includes locknut. Stainless Steel. MFG# HTH1500S UPC# 742985139015
200 item(s)
+

$69.00 $60.99
Includes locknut. Stainless Steel. MFG# HTH1250S UPC# 742985139008
46 item(s)
+

$42.00 $39.99
Includes locknut. Stainless Steel. MFG# HTH1125S UPC# 742985138995
231 item(s)
+

$39.00 $36.99
Includes locknut. Stainless Steel. MFG# HTH500S UPC# 742985142121
86 item(s)
+

$104.00 $89.99
Includes locknut. Stainless Steel. MFG# HTH2000S UPC# 742985139022
91 item(s)
+