Deck Plates

$28.22 $23.99
Deck plate and inspection port. Easy open. Screw-out design, no tools needed. High impact ABS plastic with textured surface. Durable, rugged weather resistant. Flange is pre drilled with 6 holes for required #8 fasteners. MFG# 12792-1 127921 UPC# 022697127921
173 item(s)
+

$35.28 $29.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. MFG# DP44-W DP44W UPC# 021083012117
36 item(s)
+

$35.28 $29.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. MFG# DP40-B DP40B UPC# 021083001494
113 item(s)
+

$35.28 $29.99
Outside rings at least 1/2'' smaller in diameter for use where space for deck plate may be limited. Fastenerless mounting. May be drilled & counter-bored for normal panhead screw mounting. White. MFG# DP40-W DP40W UPC# 021083001562
332 item(s)
+

$39.99 $33.99
Designed to conceal mounting fasteners under quick-twist cover. Low-profile, self-centering. Quickly locks into place. Three separate sealing areas designed to chase water from plate opening, assuring watertight closure. Non-jamming, self-cleaning bayonet threads. Lift center for easy removal. OD: 7''. ID: 5''. Hole...
171 item(s)
+

$45.87 $38.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. Hole Cut: 6-1/2" Outer Diameter: 8-1/8" Passage: 6" MFG# DP64-W DP64W UPC#...
28 item(s)
+

$45.87 $38.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. MFG# DP60-W DP60W UPC# 021083001814
336 item(s)
+

$51.75 $43.99
Extra heavy O-ring for watertight fit. Lightweight, durable, non-corroding, self cleaning, non-skid raised dimple center. Standard trim ring. OD: 10''. ID: 7-5/8''. Hole cut: 8-3/8''. MFG# DP83-W DP83W UPC# 021083002484
101 item(s)
+

$9.40 $7.99
4" O-Ring For Screw-In Deck Plate  Standard trim ring. ONE each MFG# D4S-G D4SG UPC# 021083001296
64 item(s)
+

$16.46 $13.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# D6P-G D6PG UPC# 021083001319
145 item(s)
+

$48.22 $40.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# DP61-W DP61W UPC# 021083001975
78 item(s)
+

$51.75 $43.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# DP63-W DP63W UPC# 021083002187
112 item(s)
+

$45.87 $38.99
Standard trim ring. MFG# DP62-W DP62W UPC# 021083002095
146 item(s)
+

$10.58 $8.99
6" O-Ring For Screw-In Deck Plate - One O Ring MFG# D6S-G D6SG UPC# 021083001326 MFG# D6S-G D6SG UPC# 021083001326
173 item(s)
+

$55.60 $48.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# DP83-B DP83B UPC# 021083002439
58 item(s)
+

$17.64 $14.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# D8P-G D8PG UPC# 021083001333
208 item(s)
+

$55.60 $49.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# DP81-W DP81W UPC# 021083010052
71 item(s)
+

$58.60 $51.99
Standard trim ring. MFG# DP80-W-C DP80WC UPC# 021083010007
70 item(s)
+

$56.46 $47.99
An extra heavy ?O? ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners. MFG# DP85-W DP85W UPC# 021083010090
76 item(s)
+

$51.75 $43.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. MFG# DP80W UPC# 021083009995
160 item(s)
+

$41.16 $34.99
Access without tools. Self-aligning center & gasket assures watertight seal. Patented back-up sealing wall leaves plate watertight. Use in compartments where change in air pressure due to temp or oil canning can occur. MFG# DP-60-W-C DP60WC UPC# 021083001821
35 item(s)
+

$23.52 $19.99
Designed to conceal mounting fasteners under quick-twist cover. Low-profile, self-centering. Quickly locks into place. Three separate sealing areas designed to chase water from plate opening, assuring watertight closure. Non-jamming, self-cleaning bayonet threads. Lift center for easy removal. OD: 7''. ID: 5''. Hole...
69 item(s)
+

$35.28 $29.99
Standard trim ring. MFG# DP42B UPC# 021083012063
18 item(s)
+

$35.28 $29.99
4" Deck Plate with Standard Trim Ring   White ring and plate with dimples. Outside Diameter: 6 1/8" (15.6 cm) Inside Diameter: 4" (10.2 cm) Hole Cut: 4 1/2" (11.4 cm)  Thin Rim with or without screw holes may be available in s ome c olor / material combinations. Thin rim OD is 5.625"...
73 item(s)
+