Tables & Mounts

$14.11 $11.99
Molded of black high-impact plastic. Mounts flush to floor. Base: 6-5/8" dia. with 1-5/8" recess. Hole for table leg has molded-in plug to eliminate cap hole when leg is not in place. Accepts #10 x 1-1/4" oval head SM screws. This product Fits 2" diameter legs. MFG# 12-1127 121127 UPC# 030612211273
103 item(s)
+

$141.16 $119.99
Includes: table top, 26'' Stainless Steel leg & mount. MFG# 12-1109C 121109C UPC# 030612211099
19 item(s)
+

$72.93 $61.99
Molded from high-impact plastic. Quick, easy set-up. Cleans with soap & water. Molded in underside fits 2" diameter table legs (sold separately), which attach to floor receptacles (also sold separately). Octagonal Top:. 20" across with installed height of 27". Tops have four large molded in recesses to...
13 item(s)
+

$152.93 $129.99
Includes: table top, 26'' Stainless Steel leg & mount. MFG# 12-1106C 121106C UPC# 030612211068
80 item(s)
+

$82.34 $69.99
Molded from high-impact plastic. Quick, easy set-up. Cleans with soap & water. Molded in underside fits 2" diameter table legs (sold separately), which attach to floor receptacles (also sold separately). Rectangular Top: 16"x28" with installed height of 26". Tops have four large molded in recesses to...
104 item(s)
+

$135.28 $114.99
Removable Marine/RV Tables Octagonal Flush Detmars removable table kits permit quick and easy setup in virtually any boat or RV camper Two table tops are offered rectangular or octagonal shapes both are molded from high impact plastic for durability and resistance to sun salt water and cleansers Clean up requires...
26 item(s)
+

$174.11 $147.99
Detmars removable table kits permit quick and easy setup in virtually any boat or RV camper Both rectangular and octagonal shapes are molded from high-impact plastic for durability and resistance to the sun salt water and cleansers Clean up only requires soap and water MFG# 12-1107C 121107C UPC# 030612211075
33 item(s)
+

$42.99 $29.99
2" diameter tube table leg measures 26" in length. Corrosion-resistant 304 Stainless Steel with brushed finish. MFG# 12-1122 121122 UPC# 030612211228
29 item(s)
+

$94.11 $79.99
Garelick Manufacturing 75402 Side Mount Table Bracket Allows installation of table system to any vertical surface Spring loaded locking pin holds table leg in place MFG# 75402 UPC# 038203754024
79 item(s)
+

$451.69 $408.99
Oval Top (75320) : Acrylic-coated ABS plastic with 2 recessed cup holders. MFG# 75320 UPC# 038203753201
2 item(s)
+

$382.39 $331.99
MFG# 75349:01 7534901 UPC# 038203753492
Out-of-stock

$78.99 $63.99
Chrome plated brass with black plastic knob. Screw size is 8. Angle width is 1". Angle length is 1-3/8". MFG# 0719DP0CHR UPC# 085226020681
11 item(s)
+

$12.93 $10.99
Stamped 304 stainless steel. #8 FH fastener. MFG# 221310-1 2213101 UPC# 035514221375
20 item(s)
+

$104.00 $74.99
Heavy-Duty folding table support with a 500 lb load limit. Use #12 fasteners. MFG# 221355-1 2213551 UPC# 035514221870
140 item(s)
+

$11.75 $9.99
2 per card. MFG# 37551 UPC# 719249375519
196 item(s)
+

$42.34 $35.99
Stamped 304 stainless steel. One set includes two wall brackets and two table brackets. MFG# 221320-1 2213201 UPC# 035514221030
25 item(s)
+

$754.39 $575.99
Black Anodized 12-1/2" square table mount. 12" diameter base with 11" hole pattern for added stability. Nylon clamping bushings with stainless steel hardware. Air-Powered height adjustment, simply release to raise or push down and lock in place. No pumps or power required. Great for boat, RV, deck, and patio. Height...
8 item(s)
+

$690.89 $527.99
12-1/2" square table mount. 12" diameter base with 11" hole pattern for added stability. Nylon clamping bushings with stainless steel hardware. Air-Powered height adjustment, simply release to raise or push down and lock in place. No pumps or power required. Great for boat, RV, deck, and patio. Height 12-3/4", 20",...
28 item(s)
+

$88.22 $74.99
Anodized aluminum post High-strength black plastic table mount. 7" round satin aluminum floor base, with 5-3/4" hole pattern. Height 27" MFG# 1662127 UPC# 038132948648
30 item(s)
+

$118.81 $100.99
Springfield Marines 1670008 Table Top is rectangle with a table dimension of 16 x 28 This rectangular table top features light-weight heavy-duty molded marine grade plastic to help resist the harsh marine environments This table top does not include a hole for an umbrella Installation is a quick and easy process...
14 item(s)
+

$201.16 $170.99
Springfield Marines 1690107 Thread-Lock Table Package is rectangular with a table dimension of 16 x 28 The Thread-Lock Post has an overall height of 27 and is composed of anodized aluminum Features black plastic table mount and aluminum locking base which is designed as a surface mount MFG# 1690107 UPC#...
Out-of-stock

$118.81 $100.99
Constructed of high quality, lightweight injection molded plastic and designed for lasting strength and durability. Recessed drink holders. Size: 18''x30''. MFG# 1670006 UPC# 038132910812
18 item(s)
+

$131.75 $111.99
Party Platter table top includes 5 built-in cup holders. Plastic table mount is built into the table top to accept the anodized aluminum Thread-Lock™ Post. Surface mount black plastic Thread-Lock™ base. Package includes table, 27" post, and base.  Size 17" x 21.5" MFG# 1690901 UPC# 038132945722
73 item(s)
+

$35.28 $29.99
1660704-L: Plastic Table Mount: Table mount fits 2-3/8'' Thread Lock table post, mounts to underside of any table for easy removal and storage of table top. MFG# 1660704-L 1660704L UPC# 038132910508
29 item(s)
+

Help

Have any questions on our products?  Feel free to contact us.