Shop our Catalog Store in East Ridge, TN

Categories

Dock Accessories

← Prev
1 2 3
Next →
Sort by Alphabetical: A to Z
24 Per Page
  • Save 15%
Tie Down Angle - 2-1/2"L X 5"H 26527
$15.28 $12.99
DOCK SYSTEM Angle-Use for all cross supports. 2-1/2"Lx5"H. Part # 26527 CANNOT BE SOLD IN CALIFORNIA MFG# 26527 UPC# 081628265279
153 item(s)
+ −
  • Save 15%
Tie Down Back Up Plates 26413
$17.64 $14.99
DOCK SYSTEM Back Up Plates - Hardware designed for use with 1-1/2" thick lumber; minimum width 6:. Hardware is mounted with 3/8" carriage bolts (M). All male & female dock - to - dock connections are made with either 3/4" bolts with lock nut (N) or 3/4" connecting pins (O). Tie Downs' Wood Dock Plan Kit will...
83 item(s)
+ −
  • Save 15%
Tie Down Connector Pin Set - 3/4" 26531
$23.52 $19.99
DOCK SYSTEM Connector Pin Set - For quick disconnect. Used to connect male & female connectors. Galvanized 3/4" connector pin & hitch clip pin. Part No. 26531 MFG# 26531 UPC# 081628265316
281 item(s)
+ −
  • Save 15%
Tie Down Engineering Angle 2-1/2 L x 5 H 26406
$18.81 $15.99
F. Should be used for all cross supports. Each leg 2-1/2"L x 5"H. MFG# 26406 UPC# 081628264067
279 item(s)
+ −
  • Save 22%
Tie Down Engineering Chain Holder 26529
$62.49 $48.99
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H. MFG# 26529 UPC# 081628265293
42 item(s)
+ −
  • Save 23%
Tie Down Engineering Chain Holder Injin 26410
$78.99 $60.99
J. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H. MFG# 26410 UPC# 081628264104
50 item(s)
+ −
  • Save 30%
Tie Down Engineering Dock Hardware - 14" Internal Pile Holder Commercial Grade 26434
$441.59 $310.99
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16". For more dock hardware information including building guides, go to www.tiedown.com/adock.html CANNOT BE SOLD IN CALIFORNIA. MFG# 26434 UPC#...
7 item(s)
+ −
  • Save 24%
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop Commercial Grade 26391
$56.39 $42.99
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3". For more dock hardware information including building guides, go to www.tiedown.com/adock.html . CANNOT BE SOLD IN CALIFORNIA. MFG# 26391 UPC#...
18 item(s)
+ −
  • Save 23%
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop Commercial Grade 26394
$63.49 $48.99
Commercial Grade w/6" radius for12 Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 18" x 3". For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26394 UPC# 081628263947
Out-of-stock
  • Save 23%
Tie Down Engineering Dock Hardware - Outside Corner/Male 10L x 5H 26418
$72.99 $55.99
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab. For more dock hardware information including building guides, go to www.tiedown.com/adock.html MFG# 26418 UPC# 081628264180
3 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hardware Carriage Bolt Set 8/Box 26535
$58.81 $49.99
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". MFG# 26535 UPC# 081628265354
47 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hardware M Carriage Bolt Set 8/Bag 26534
$23.52 $19.99
Used to attach A thru K component parts. 3/8 x 2-1/2" bolt flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3". CANNOT BE SOLD IN CALIFORNIA MFG# 26534 UPC# 081628265347
91 item(s)
+ −
  • Save 21%
Tie Down Engineering Dock Hdw (N) Hex Head 8/Bag 24279
$66.19 $51.99
N. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" X 3-1/2". MFG# 24279 UPC# 081628242799
61 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hdw Lag Bolt 3/8X3 8/Bag 24289
$21.16 $17.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24289 UPC# 081628242898
37 item(s)
+ −
  • Save 15%
Tie Down Engineering Dock Hdw Lag Bolt 3/8X5 8/Bag 24292
$29.40 $24.99
Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. MFG# 24292 UPC# 081628242928
62 item(s)
+ −
  • Save 15%
Tie Down Engineering Female T Connector Ingin 26407
$61.16 $51.99
G. Two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x 5"H. MFG# 26407 UPC# 081628264074
94 item(s)
+ −
  • Save 23%
Tie Down Engineering Hd Deck Plate 26416
$143.39 $110.99
Heavy duty roller assembly. Bracket and roller bolt directly to the deck plate ( # 26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. CANNOT BE SHIPPED TO CALIFORNIA MFG# 26416 UPC# 10081628264163
18 item(s)
+ −
  • Save 15%
Tie Down Engineering Hd Inside Corner Indin 26403
$67.05 $56.99
D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit and is 8-1/4"L x 5"H. MFG# 26403 UPC# 081628264036
115 item(s)
+ −
  • Save 15%
Tie Down Engineering Hd Outside Corner (End) Incin 26402
$59.99 $50.99
C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H. MFG# 26402 UPC# 081628264029
21 item(s)
+ −
  • Save 23%
Tie Down Engineering Hd Outside Corner (Female) Ina 26400
$78.99 $60.99
A. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H. MFG# 26400 UPC# 081628264005
73 item(s)
+ −
  • Save 23%
Tie Down Engineering Hd Pipe Holder Hoop 26412
$185.19 $142.99
R & S. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate. Commercial grade. MFG# 26412 UPC# 081628264128
Out-of-stock
  • Save 30%
Tie Down Engineering Hd Plate Hoop Roller 14 In 26423
$363.29 $255.99
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement. MFG# 26423 UPC# 081628264234
16 item(s)
+ −
  • Save 28%
Tie Down Engineering Hd Plate Hoop Roller 26415
$411.99 $294.99
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (# 26412) and roller assembly (# 26414) to make up for the up and down movement. For pilings up to 12" in diameter. CANNOT BE SOLD IN CALIFORNIA. MFG# 26415 UPC# 081628264159
Out-of-stock
  • Save 22%
Tie Down Engineering Heavy Duty Inside Corner 3 Inein 26404
$118.29 $91.99
E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching. MFG# 26404 UPC# 081628264043
8 item(s)
+ −
← Prev
1 2 3
Next →

Product filters

Price
 –   $
  • 5
  • 82
  • 158
  • 235
  • 311
Manufacturer
Advanced Reset

Help

Have any questions on our products?  Feel free to contact us.